iphone play back

[scott]

when i watch what has been recordered on my iphone the film runs at about 10 frames p/s ... before the last update it ran aboy 2 f p/s which was too slow but now its way to fast

[SKJM Support]

iCam plays back the Motion Event images as fast as it can from the iCamSource. What version of iCamSource are you running, Mac or Windows?


For Mac: To enable a delay in the playback you will have to open an Applications > Utilities window and copy / paste the following and press Enter to save the setting before launching the new iCamSource:

defaults write com.skjm.icamsource MotionEventPlaybackMinDelay -int 250


For PC: http://skjm.com/icam/MotionEventPlaybackDelay.reg


That essentially sets the option to wait 1/4 of a second (or 250 ms) before displaying the next image. This will result in a maximum playback rate of 4 frames per second.

If that is still too fast, you can change the 250 to 500 to make the maximum 2 frames per second, or if 250 is too slow, she can enter 100 to achieve 10 frames per second.

[scott]

thanks for the help .. it worked a treat

[SKJM Support]

You are most welcome. Please let us know if you have any further questions.