Messages

1

iCam Support / Re: repeater bridge

« on: October 05, 2011, 09:09:56 AM »

Got it working by unchecking auto config router and forwarding ports 12000 to 12100
all is good
great app
thank you for all the help

Terry~!

2

iCam Support / Re: repeater bridge

« on: September 22, 2011, 05:10:02 AM »

Email sent with ip.
The repeater bridge is a NETGEAR WNR834B running dd wrt, main router is a Netgear WNDR3700 running dd wrt.

thank you

3

iCam Support / Re: repeater bridge

« on: September 21, 2011, 05:24:10 PM »

any suggestions?

4

iCam Support / Re: repeater bridge

« on: September 21, 2011, 07:19:12 AM »

icamweb shows 3 sources and only connects 1 then and error from the server comes up. "Source connection error. one or more icamsources returned by the broker server could not be connected to."

5

iCam Support / Re: repeater bridge

« on: September 20, 2011, 10:27:10 AM »

1 that works is on the RB others are on main router. I tried from icamweb with same result.
thank you

6

iCam Support / repeater bridge

« on: September 19, 2011, 11:51:38 AM »

Hi

Lately I installed a repeater bridge and now only one of my 4 cameras are viewable from the app.
All 4 are working. and I can view them from vnc or remote desktop.
The one I can view is on the rp and not the wired router.
Any help would be appreciated.

Thank you
BTW: I have had great service with icam and this is some sort of user error.
You guys are great and I highly recommend to all..

7

iCam Support / Re: Android Gingerbread 2.3.3 (4.5.588) rooted droid x

« on: April 15, 2011, 06:39:57 PM »

iCam works perfect with Gingerbread 2.3.3 (4.5.588) on my rooted Droid x.

8

iCam Support / Re: Android Gingerbread

« on: April 15, 2011, 02:12:57 PM »

good deal. I will let ya know how it does on my rooted x running the ota gb in about an hour..

Yes, it did work 

9

iCam Support / Re: Android Gingerbread

« on: April 15, 2011, 02:00:18 PM »

did it work ok with the sim?  Im getting ready to install the ota gb..2.3.3 (4.5.588)

10

iCam Support / Re: Ad Blocker woes - They don't play nice with iCam

« on: April 15, 2011, 01:58:15 PM »

yup I had same problem with ad blocker app. I uninstalled. It would only show 1 cam and was very slow to connect if it connected. Then after sbf it would work consistant but only show 2 cams when I was running 4. Im getting ready to install the new gingerbread and see how it does. It wouldnt work with the original gb leak..

11

iCam Support / Android Gingerbread 2.3.3 (4.5.588) rooted Droid x

« on: April 14, 2011, 10:06:33 AM »

Has icam been tested on gingerbread? Was getting ready to upgrade my droidx and wanted to verify it will work..
Thanks

12

iCam Support / Re: connecting to iCamsouces (never connects)

« on: February 22, 2011, 09:14:28 AM »

Finally found what was causing my phone to have problems with icam.
I can repeat the issue over and over so this is the culprit.
 
It would even come up with broker error at times.
 
Its a program called adfree. It is fine until I update then it causes the same exact issue. I can revert and it fixes it sometimes.
best way was to use recovery before the program updated.
 
Icam is working 100% now. 

this is the program  http://www.appbrain.com/app/adfree-android/com.bigtincan.android.adfree

Thanks for all the help

13

iCam Support / Re: connecting to iCamsouces (never connects)

« on: February 14, 2011, 04:28:49 PM »

Yes Source Connection Error happened once. Then refreshed shows 1 camera refresh again and nothing.
iCamweb shows all 4 sources.
Thanks

When only two cameras come up do you see a "Source Connection Error" or any other error message if you let it try and connect for about 60 seconds or so?

14

iCam Support / Re: connecting to iCamsouces (never connects)

« on: February 14, 2011, 12:15:21 PM »

yes 2 wifi computers and 2 with ethernet cable.
ICamweb shows 4 sources..

All cameras are usb..
I will leave them all connected and running to stop the stale issue.

refresh still only shows 2 cameras in no paticular order..

I kept refreshing and all 4 came up, I refreshed again and only 2 now.
This is progress. Seems like the bandwidth is being throttled.

Thanks for all the help..

15

iCam Support / Re: connecting to iCamsouces (never connects)

« on: February 13, 2011, 09:48:10 PM »

Email sent

iCamsource will work running all cameras when you view on a pc or laptop.

Will not work on the phone unless 2 of the cameras sre disconnected.

Has to be a phone issue. Phone is droid x.

Thanks for the help