Hello everyone,
I have been running iCamSourcePro on an iMac since it was first released and used the original iCam Source app for a few years prior to the release of iCamSourcePro.
I have a few Trendnet TV IP-422 / 422W / and 422WN cameras that work perfectly including sound monitoring and pan/tilt adjustment from my iPhone and iPad.
I recently acquired two newer Trendnet TV-IP651WI cameras. While the video picture quality is much better on these new cameras, I no longer have audio monitoring or pan/tilt capability with this new model.
I do have audio and pan/tilt when accessing the camera directly through a web browser so the feature would appear to be "turned on" in the camera settings.
I’m using the following path on iCamSourcePro to access the cameras:
ipaddress /video/mjpg.cgi
I have tried all of the other paths shown in the iCamPro support page. Some of the paths don’t work at all, others give me the same result - video only with no sound and no pan/tilt control.
Does anyone know if there are any other settings that may enable the audio and pan/tilt feature with the TV-IP651WI cameras, or are these new cameras just not full feature compatible with iCamProSource v1.1.1?
Any help or suggestions will be sincerely appreciated.
Thanks!
Ed
