Author Topic: SWANN SWADS-440IPC  (Read 4509 times)

lhl94303

  • Newbie
  • *
  • Posts: 2
    • View Profile
SWANN SWADS-440IPC
« on: July 10, 2013, 06:48:08 PM »
Hi,

I have been trying to add a SWANN 440IPC to iCamSource. I was able to get the video stream from the camera but it's all garbled. VLC seems to have no trouble with the video stream. Below is the complete VLC Codec information.

Stream 0
     Type: Video
     Codec: Motion JPEG Video (MJPG)
     Resolution: 320x240
     Decoded format: Planar 4:2:2 YUV full scale
Stream 1
     Type: Audio
     Codec: IMA WAV ADPCM Audio (ms)
     Sample rate: 8000 Hz
     Bits per sample: 16

Is the format supported by iCamSource? Are there any settings in iCamSource or the 440IPC that I can modify to make it work? Thanks!

lhl94303

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: SWANN SWADS-440IPC
« Reply #1 on: July 11, 2013, 12:01:36 PM »
I got it working by appending "/videostream.cgi" to the end of URL. I had "/videostream.asf" as suggested somewhere else. This site (http://skjm.com/icam/mjpeg.php) suggests "http://<icam url>/cgi/mjpg/mjpeg.cgi" which apparently does not work with 440IPC. Hope this helps someone.