sitecom 150N IP Camera HTTP/1.0 302 Rdirect

[elifant]

Hi@all,

i use an sitecom 150N. to get a connetion in any web-browser is no problem for me. but to connetct th ip cam with icamSecure is not possible. the intenal cam of the pc is going well.
useing the wi-fi or ethenet cam, i get allways HTTP/1.0 302 Redirect information on the video window.
who can help?

sorry for my bad english .... :-)

[OUAnthony]

If I am reading your post correctly, you are having a hard time finding the correct link to use in icamsource for your camera. Go to the links below to see if it will help you discover what link to use in icamsource for your camera.

http://skjm.com/icam/mjpeg.php

http://skjm.com/icam/mjpeg_test.php

[SKJM Support]

Hi@all,

i use an sitecom 150N. to get a connetion in any web-browser is no problem for me. but to connetct th ip cam with icamSecure is not possible. the intenal cam of the pc is going well.
useing the wi-fi or ethenet cam, i get allways HTTP/1.0 302 Redirect information on the video window.
who can help?

sorry for my bad english .... :-)

We haven't tested with that particular camera, but if it outputs MJPEG formatted data, it'll probably work with iCamSource.

When you run iCamSource, you'll need to select the "Ethernet /Wi-Fi" tab because the camera is a network camera, not a USB camera. Then, enter the MJPEG or JPEG URL for your camera.

If the MJPEG or JPEG URL isn't something that can be found by searching around with Google or by contacting their support, we actually have another solution available, although it is currently in its very preliminary stages, and that is: http://skjm.com/icam/mjpeg_test.php

When you enter the camera's IP address and port into that web page, it will attempt to connect to the camera using all of the common MJPEG and JPEG URLs that we are aware of. If any of the URLs produce an image, then that is the URL to use in iCamSource.

If your camera requires a login and password, you can enter them in that webpage right before the address : login:password@Camera_address

[Zweinstein]

I bought this camera today and it worked using the http://skjm.com/icam/mjpeg_test.php
I got the right link and icamsource worked immediately.

Thanks!

Now I've to see how I get this camera to work over a WiFi, but that's for another forum

[elifant]

Thanks for helping me,
now i find out the correct URL syntax.
This link - http://skjm.com/icam/mjpeg_test.php
was realy helpful.

But i do not get any video stream - only jpg stills

best to @
Michael

[OUAnthony]

You are correct...mjpeg is simply a series of still pictures, that if played back fast enough, will look like video...although not fluid video. Since Apple/AT&T impose a bandwidth limit on iCam, fluid video (like a mp4/h.264 feed) would probably not be very clear at all. I think this, combined with the fact that licensing would be required, is why iCam does not support mp4 cameras. They only stick to motion JPEG cameras.