Asante Voyager --- URL ?

[bob1966tb]

Hi,

I just purchased your program and am trying to view my camera using iCamSource.

My Camera is an Asante Voyager I running 2.02 firmware. It can stream MJEP.

I am using the following URL:

http://ip.ip.ip.ip/image.jpg?type=motion

I found that URL from the following forum:

http://www.crazypixels.com/forum/viewtopic.php?f=3&p=1002

Anyway -- no dice. I get an error from iCamSource
" your network camera can not be connect to "

Any ideas of what to try next ?

BTW - the Asante works from my LAN and can also be viewed from the WAN by using IE or Firefox.

Thanks for any suggestions !

Best Regards,

Bob

[bob1966tb]

Hi,

I just tried the Live Cams iPhone app and it seems to work fine.

I am able to view my Asante Voyager on my iPhone with this app.



I purchased your Icam/Icamsource app yesterday and would like to use it also -- for the motion detection feature.

I look forward to your feedback regarding your app on this Asante camera.

Best Regards,

Bob

[Stefan]

Are you using the internal IP address of the camera, and is your camera listening on a port other than the default, 80?

The MJPEG URL that we have in our database (http://skjm.com/icam/mjpeg.php) is: http://xxx.xxx.xxx.xxx/image.cgi

Where xxx.xxx.xxx.xxx is your camera's internal IP address.

If you are using a custom port, the URL would be http://xxx.xxx.xxx.xxx:yyyy/image.cgi

Where yyyy is the port.

What is the URL that you use to connect to the camera in your web browser from your computer?

[bob1966tb]

Hi,

Yeppers -- "another" Port issue 

This is what I used based on your suggestion and the fact that I am using a re-directed  ( NON Port 80 ) setup


http://ip.ip.ip.ip:PORT/image.jpg?type=motion

And.........

It works !!

Ain't Science wonderful

Thanks for your FAST feedback.

Best Regards,

Bob

[Stefan]

You are most welcome!