Dahua Cams, supported?

[qvilorio]

Dear  Sirs,

Would like to know if your support Dahua IP cams, they are H.264 and MJPEG dual stream.

Thanks,

[SKJM Support]

We haven’t tested with that particular camera, but if it outputs MJPEG formatted data, it’ll probably work with iCamSource.

When you run iCamSource, you’ll need to select the "Ethernet /Wi-Fi" tab because the camera is a network camera, not a USB camera. Then, enter the MJPEG or JPEG URL for your camera.

If the MJPEG or JPEG URL isn’t something that can be found by searching around with Google or by contacting their support, we actually have another solution available, although it is currently in its very preliminary stages, and that is: http://skjm.com/icam/mjpeg_test.php

When you enter the camera’s IP address and port into that web page, it will attempt to connect to the camera using all of the common MJPEG and JPEG URLs that we are aware of. If any of the URLs produce an image, then that is the URL to use in iCamSource.

If your camera requires a login and password, you can enter them in that webpage right before the address: login:password@Camera_address

[wyre]

Was curious if you had any luck getting the dahua camera to work? I was going to buy one

Dear  Sirs,

Would like to know if your support Dahua IP cams, they are H.264 and MJPEG dual stream.

Thanks,