Author Topic: Foscam FI9805w Anyone tried this IP Cam?  (Read 10546 times)

Maynard

  • Newbie
  • *
  • Posts: 1
    • View Profile
Foscam FI9805w Anyone tried this IP Cam?
« on: January 26, 2014, 11:15:22 PM »
Anyone use these higher Res cams over the FI8905W cameras?  This is. 1.3 960p H.264 camera

I want to use iCam along with the Blue Iris.  I know Blue Iris will work, but will iCam?

Thx.

SKJM Support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1918
    • View Profile
Re: Foscam FI9805w Anyone tried this IP Cam?
« Reply #1 on: January 27, 2014, 05:17:18 PM »
Support for H.264 has been requested in the past and is currently on our list of potential features to implement in the future.

SKIN

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Foscam FI9805w Anyone tried this IP Cam?
« Reply #2 on: May 06, 2014, 01:28:48 PM »
Is there a timeframe or scheduled date?

SKJM Support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1918
    • View Profile
Re: Foscam FI9805w Anyone tried this IP Cam?
« Reply #3 on: May 07, 2014, 08:33:13 PM »
Unfortunately, we do not have any immediate plans to support H.264.

echiang

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: Foscam FI9805w Anyone tried this IP Cam?
« Reply #4 on: August 02, 2014, 07:35:16 AM »
Instead of using the h.264 stream, could the JPEG be used?

The FI9805w can do a jpeg snapshot with a URL like:

http://192.168.1.1:999/cgi-bin/CGIProxy.fcgi?cmd=snapPicture&usr=admin&pwd=admin

I've tested the URL in Safari and it does work.

So, I put the URL into iCamSource and selected JPEG stream instead of MJPEG, but it still did NOT work.

Am I missing something?

SKJM Support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1918
    • View Profile
Re: Foscam FI9805w Anyone tried this IP Cam?
« Reply #5 on: August 04, 2014, 06:12:22 PM »
You can try our MJPEG JPEG URL Test page, although it is currently in its very preliminary stages, and that is: http://skjm.com/icam/mjpeg_test.php

When you enter the camera’s IP address and port into that web page, it will attempt to connect to the camera using all of the common MJPEG and JPEG URLs that we are aware of. If any of the URLs produce an image, then that is the URL to use in iCamSource.

If your camera requires a login and password, you can enter them in that webpage right before the address: login:password@Camera_address

echiang

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: Foscam FI9805w Anyone tried this IP Cam?
« Reply #6 on: August 04, 2014, 09:38:04 PM »
Thanks. I will give it a try.