iCam feature request

[clubber1966]

Hello, I have iCam running with mainly TrendNet cameras. some of the PTZ cameras support preset positions. Can I have a request where icamsource supports and implements the preset positions chosen by the user from iCam.

Also a second feature request where icamsource can use the preset positions to auto move the camera around on a timed basis and compare an image from the same position from a previous auto move to work out if there is anything on the image that has changed, i.e. implement automove and motion detection. e.g. I have a trendnet and I want to automove to 3 positions every 3 minutes and check to see if there is any movement based previous images at this position.

Hope that makes sense.
ACL

[SKJM Support]

Thank you for your post and suggestions.

Presets for PTZ cameras is a feature that has been requested in the past and is currently on our list of potential features to implement in the future.

We have not had any requests for combined PTZ/motion detection, however, we will add it to the list.

Thanks again.