Author Topic: Version 2.4.2 (Read 7354 times)

Merlin · « **Reply #15 on:** December 05, 2011, 07:48:43 PM »

Didn't know if I had been clear but I still want to upgrade to 2.4.2. I bought the Logitech QuickCam Orbit AF specifically for the new version. I believe I cannot control the camera until I get that version. Please Help....

Merlin

SKJM Support · « **Reply #16 on:** December 05, 2011, 11:05:39 PM »

Does iCamSource crash for just the XBox camera or all USB cameras you've connected?

Also, we'd like to try a test with the Orbit. Please clear the registry key, then run just the Orbit camera in iCamSource and let us know if it crashes.

Merlin · « **Reply #17 on:** December 06, 2011, 11:46:48 AM »

iCamSource crashes for all USB cameras. I had already cleared the registry with your link and just setup the Logitech QuickCam Orbit AF only and it crashed as well. I tried all the webcams I have and they crashed (Logitech QuickCam Orbit AF, X-Box camera, Gigaware (I believe it is the 25157) and a HP WebCam 2100). None of the wireless cameras crash when there are no USB cameras hooked up (3 - Cisco Linksys Wirelese N WVC80N, 1 - Airlink 100 AICN1777W). When I downgrade to 2.4.1 they all work perfectly.

Merlin

SKJM Support · « **Reply #18 on:** December 06, 2011, 09:07:31 PM »

The test version is available for you to try at: http://skjm.com/icam/iCamSource2.4.2a.exe

You can run the executable from any folder, such as the Desktop.

Merlin · « **Reply #19 on:** December 06, 2011, 10:08:51 PM »

Okay that's much better....all my USB cameras and WI-FI cameras work with this version. I'm sure this is a prelimary version, but I wanted to let you know that I can not move the Logitech QuickCam Orbit AF on my phone with this version.

Merlin

SKJM Support · « **Reply #20 on:** December 07, 2011, 12:04:41 PM »

Glad it is working. Yes, it is a preliminary version, with the PTZ functionality removed.

Merlin · « **Reply #21 on:** December 07, 2011, 12:55:57 PM »

Thanks for everything! I look forward to using the PTZ in the future with the USB Logitech Orbit. I can't say enough good things about the support.

Merlin

SKJM Support · « **Reply #22 on:** December 07, 2011, 02:21:13 PM »

You're most welcome.

We've made another test version that includes the PTZ controls for you to try: http://skjm.com/icam/iCamSource2.4.2b.exe

Please let me know if it crashes on your computer. If it doesn't, please let me know if it controls your Logitech Orbit.

Merlin · « **Reply #23 on:** December 07, 2011, 08:38:17 PM »

OUTSTANDING! No crashes thus far....and PTZ control for the Logitech Orbit works over the network and 3G. I'll run it all night and let you know in the morning if there are any issues.

Merlin

Merlin · « **Reply #24 on:** December 07, 2011, 09:09:00 PM »

Okay just one little issue. The up and down PTZ controls appear to be reversed from other PTZ cameras you have setup. As of right now still running smooth.

Merlin

Merlin · « **Reply #25 on:** December 08, 2011, 10:01:32 AM »

No crashes or issues other than the one I wrote above. Nice work....

Merlin

SKJM Support · « **Reply #26 on:** December 08, 2011, 12:10:36 PM »

The tilt control is flipped because there are 2 versions of the Logitech Orbit and they respond to the tilt command in opposite ways. Please try this test version: http://skjm.com/icam/iCamSource2.4.2c.exe

Merlin · « **Reply #27 on:** December 08, 2011, 09:42:30 PM »

That fixed it. Everything has been running smoothly for the evening. Thanks for everything...

Merlin

SKJM Support · « **Reply #28 on:** December 09, 2011, 11:25:35 AM »

I'm glad it is working!

If you have any other issues or questions, please let us know.

SKJM Support · « **Reply #29 on:** December 09, 2011, 05:27:10 PM »

Our developers have made an installer for you with the fix that will update the version of iCamSource that's installed on the computer so that you don't need to run the test version from the desktop anymore. You can get the installer here: http://skjm.com/icam/iCamSetup2.4.3.exe

SKJM Forum

News: