one usb, one wireless, both show on icamsource. only one shows on iphone icam

[molieri]

So i have one usb connected cam and one wireless d-link dcs-930l cam. they both show on the icamSource but only one shows on iphone icam. I am on windows vista.. frustrated.....

help..

[SKJM Support]

You can view multiple cameras simultaneously if you use the exact same login and password for all of the cameras.  When you use that same login/password in iCam on your iPhone, it will show all of the cameras that are using that exact login/password.

[irgreen]

I have the same problem. It used to work but now the stream from my iMac which is acting as the server does not display on the iPhone. If I pull up iCamSource on the iMac I can see the video from the iMac's iSight just fine as well as from the other two Linksys cameras I have configured. If I go to the iPhone app on the Linksys cameras display.

[SKJM Support]

I have the same problem. It used to work but now the stream from my iMac which is acting as the server does not display on the iPhone. If I pull up iCamSource on the iMac I can see the video from the iMac's iSight just fine as well as from the other two Linksys cameras I have configured. If I go to the iPhone app on the Linksys cameras display.

What error message are you seeing on your phone when you are unable to connect: No Sources Found, Broker Connection Error, or Source Connection Error? Are you having problems connecting when your phone is connected via 3G, WiFi, or both?

For more information about iCam error messages and possible fixes, please go here: http://skjm.com/icam/help/troubleshooting.php

[irgreen]

I'm not getting any error message. There are three cameras configured. One on the iMac and two wireless Linksys cameras. If I pull up iCamsource on the iMac I can go through each camera and see its associated video. However, if I bring the app up on my iPhone the app loads fine but only displays the video feeds from the two Linksys cameras, it does not display the iMac's iSight video.

[SKJM Support]

If you have verified that your iSight is using the same exact login/password please go to http://whatismyipaddress.com/ from the computer running the iCamSource and send your external IP address to support@skjm.com so we can attempt to look it up in the Broker Server logs and hopefully troubleshoot the problem. Also, please reference this forum post and your user name in your email.

[Rabibull]

I'm not getting any error message. There are three cameras configured. One on the iMac and two wireless Linksys cameras. If I pull up iCamsource on the iMac I can go through each camera and see its associated video. However, if I bring the app up on my iPhone the app loads fine but only displays the video feeds from the two Linksys cameras, it does not display the iMac's iSight video.

Funny... I am having the opposite problem. I have two wireless Cisco WVC80N cameras and one USB camera hooked to a Mac Mini. The wireless cameras will sometimes not show on iCam. No error message, just a no-show. The USB camera always loads.  And, all ameras always load on iCamweb. If I stop and start the feed in iCamsource, the wireless cameras show for a bit, then disappear again.

[SKJM Support]

I'm not getting any error message. There are three cameras configured. One on the iMac and two wireless Linksys cameras. If I pull up iCamsource on the iMac I can go through each camera and see its associated video. However, if I bring the app up on my iPhone the app loads fine but only displays the video feeds from the two Linksys cameras, it does not display the iMac's iSight video.

Funny... I am having the opposite problem. I have two wireless Cisco WVC80N cameras and one USB camera hooked to a Mac Mini. The wireless cameras will sometimes not show on iCam. No error message, just a no-show. The USB camera always loads.  And, all ameras always load on iCamweb. If I stop and start the feed in iCamsource, the wireless cameras show for a bit, then disappear again.

Do you experience this issue if only one of the problem cams is running?