No Audio after update to iCam 2.0 / iCamSource 2.1

[Grumpa]

As it says I've lost audio to my 3 cameras after the update.  I went back to 1.4.2.6 and the audio returns.  I am using port forwarding on all three cameras, but even with port forwarding off, and "auto config router" ticked I have the same no audio problem.

[Flyguy001]

Same problem as in this thread...
http://skjm.com/forum/index.php?topic=1070.0

[Stefan]

We have been able to replicate the same issue (no audio when using iCamSource 2.1 for Windows), and should have an updated iCamSource out shortly.

In the meantime we would suggest reverting to 1.4.2.6 as iCam 2.0 is backwards-compatible with the previous version of the iCamSource. (The iPad streams just won't be full-resolution.)

Odd that this didn't come up in the iCamSource 2.0 BETA test, as the bug does appear in that version as well.

Thank you all for your feedback and patience!

[Stefan]

We have a new version of the iCamSource available that should fix the "no audio" issue: http://skjm.com/icam/iCamSetup2.1.1.exe

[Flyguy001]

Indeed! All is well on my end with the new update... Thanx a ton!

[Stefan]

Glad to hear it, and you are most welcome.

[Grumpa]

Echo the good news ... 2.1.1 audio is fine on all cameras / PCs ... one note though ... when installing 2.1.1 over 2.1 or 1.4.2.6, the installer overwrites (changes) the port forwarding ports.  Mine were 12000 - 12005, which was changed to 12000 - 12100, which caused the dreaded "No Sources" message on iPhone.  Manually changed them back and all is fine.  Thanks!

[pccpc]

Not good news here. No audio from either iCam Source 1.4.6 or 2.1.1 after installing iPhone 2.0.

[pccpc]

NEVER MIND! I rebooted the iPhone 4, and all is well on both Source Programs. Good Job!!