Icam source errors out frequently!!???

[Stinky_1]

Lately I have been getting the same error after a few hours or after only a couple minutes

I will upload a screenshot of the message as soon as I figure out how on this forum

[Stinky_1]

Here is the screenshot

Any ideas?

Sent from my MHA-L29 using Tapatalk

[Stefan]

If you could expand the Details from the alert and send that information to support@skjm.com we can help further troubleshoot your issue.

[Stinky_1]

I'm not sure what else I could expand on

I had 6 camera on my system, it was running on a dedicated laptop with no issues. It was an old old Dell.

I got a newer laptop to use as the dedicated machine, it started giving me the error randomly.

At first I suspected my furthest away camera was causing the problems because it is usually in and out of wifi. I removed it from the list but the problem remained.

Then I figured the new laptop may be the problem so I put another machine in its place and it still gives the error

If I press quit on the error then open icam again it will work for a while.

The amount of time it works is not consistent. The machine only runs the icam source and TeamViewer so I can remotely reset if needed. It's on a high shelf and nobody touches it.

Let me know what other info you need

I prefer if possible to try and sort it out on the forum so if anyone else experiences the same issue we they may find the answer they need.

[Stinky_1]

Found this in the icam pro section.

Your iCamSource settings may have gotten into a bad state. You can reset them by downloading and running  the following Windows registry file and then re-starting the iCamSource: http://skjm.com/icam/CleaniCamKey.reg

I just ran the reg cleaner and re-set up the icam source info.

Will see it that fixed it

Sent from my MHA-L29 using Tapatalk

[Stinky_1]

Here I am a month later. No other suggestions to try out. I did what I posted above and it seemed to be working better. I could at least get a full 24-36 hours of solid run time before it crashed again.

Now I'm back to crashing every hour or two.

Do I need to start looking for alternatives?

Sent from my MHA-L29 using Tapatalk

[Naveed]

So I was having this same issue and contacted support. They ended up sending me "iCamSource 2.9a" or something like that and it's worked flawlessly since

[Stinky_1]

Maybe one of the mods will approve posting the file on here? I'm still dealing with crashes

Naveed you have a pm

[Stinky_1]

I would love to test a copy of iCamSource 2.9a to see if that solves my problem.

I'm still experiencing the issues

[Stefan]

I would love to test a copy of iCamSource 2.9a to see if that solves my problem.

I'm still experiencing the issues

The iCamSource2.9a.exe can be downloaded here: https://skjm.com/icam/iCamSource2.9a.exe

It is an exe, not an installer, so once you download it you can run it from anywhere.

[Stinky_1]

Been running 2.9a since the link was posted. Still no luck.

Here is the details from the error log


See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.InvalidOperationException: Object is currently in use elsewhere.
   at System.Drawing.Graphics.CheckErrorStatus(Int32 status)
   at System.Drawing.Graphics.DrawImage(Image image, Int32 x, Int32 y, Int32 width, Int32 height)
   at System.Drawing.Bitmap..ctor(Image original, Int32 width, Int32 height)
   at PreviewImage.GetPreviewImage()
   at WiniCamSource.Form1.UpdatePreviewImage()
   at WiniCamSource.Form1.TimerEventProcessor(Object A_0, EventArgs A_1)
   at System.Windows.Forms.Timer.OnTick(EventArgs e)
   at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3416.0 built by: NET472REL1LAST_B
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
WiniCamSource
    Assembly Version: 1.0.6260.18800
    Win32 Version:
    CodeBase: file:///C:/Program%20Files%20(x86)/iCamSource/iCamSource.exe
----------------------------------------
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3324.0 built by: NET472REL1LAST_C
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3416.0 built by: NET472REL1LAST_B
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Core
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3429.0 built by: NET472REL1LAST_C
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Accessibility
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.