iCamSourcePro.exe Stopped Working

[dkb52]

***New Info Added***

System: Windows 7 Home Premium
iCamSourcePro: v1.0.2

Launching iCamSourcePro, the "Preferences Window" shows normally with 3 IP cameras and correct information.
Selecting "Start" the preference window indicates "Connected to Server;" however immediately results in the subject error.

Actions:
Rebooted Computer: Same Error Result
Uninstalled/Reinstalled iCamSource Pro: Same Error Result.

I have been using iCamSourcePro for a few months now, this error appeared last night.

I reverted back to the older iCamSource, and everything loads and functions properly.

Afterthought: I was watching a recorded program through DirecTV's Genie-Go, and received "GenieGo Stopped Working" error (before I was aware iCamSourcePro stopped working).

I ran the Clean Registry Key program, but re-launching iCamSourcePro, all my original settings were still present.
I'm guessing there are different versions for iCamSource and iCamSourcePro?

***I removed ALL IP Cameras then added them back one at a time.***
Everything worked until I added a third IP Camera.  The subject error returned.
Removed the third camera, things worked normally.
Added ipCam, all worked normally.  Added internal webcam, things work normally.
Added address for original IP camera back, subject error returned.

I know the camera and IP address, port, etc are working as I can access the camera through iCamSource (old version) and other monitor programs.  It appears iCamSourcePro has locked the address out.

Thanks In Advance!

[dkb52]

This Issue Is Resolved *****************

The IP Camera giving problems, seems to be working now.

The URL suffix for this camera was "/video.cgi"  I removed this suffix (problem camera only).  Upon starting (broadcast), iCamSourcePro added the suffix back; but seems to have corrected the problem.

Of course, if the problem returns, so will I.

[SKJM Support]

I’m glad you got it working!

If you have any other issues or questions, please let us know.

[motleycode]

I have been having this same issue using USB cameras for the past three days.  I have a standard Logitech usb web cam that always works properly with iCam source pro.  I also have a usb spycam that's hidden inside a usb flashdrive.  Both worked properly up until three days ago.  Now, when I plug in the spycam and start the icam source pro application everything looks the same until I hit the start button... then it tells me there's a problem and the application has been shut down.  I have not changed anything at all.

[SKJM Support]

Are you able to access your spy cam via any other video capture software running on your computer?