First of all sorry for my bad English.
Second... thanks to the guys of skjm for the very nice app.
I've read the forum to find a solution, but I'm afraid I was not able to find it. (I already know that there is another post about 3G connection problems... and i was not sure if i had to continue in that one.... sorry for any inconvenience)
And now my problem...
Some infos about my "gear":
OS: Mac Snow Leopard
Software installed:
- iCamSource version 2.1.2
Iphone4
app installed
- icam app.2.2
The problem:
I can't connect on 3G (with internet data)
What I did on the router:- Port triggers:Trigger range: Start port & end port 12000, protocol UDP (enabled)
Trigger range: Start port & end port 12100, protocol UDP (enabled)
( I left Target Range start/End=0; is that correct?)
- Forwarding:I enabled Local IP address of my machine, to start/end port 12000 and 12100.
The result is:- iCamSource is connected to the server (auto-config Router is disabled)
- I can perfectly see my camera in iPhone (iphone is connected to the same wi-fi)
- everything works fine.
But... when I disconnect iPhone from wi-fi and I try to see again my camsource, I get the following error message:
"SOURCE CONNECTION ERROR - One or more of the iCamSources returned by the iCam Broker Server could not be connected to"I also tried to check/uncheck Auto-config router... but no way. I can't connect.
What else can I do now? Any hint?
Thanks for your help.
EDIT:
PROBLEM SOLVED!!!Finally I've found this post in this same forum... and solved my problem with 3G problems:
http://skjm.com/forum/index.php?topic=402.0
Now everything is working: ALSO WITH 3G connection.
