« previous next »
Pages: [1]

Author Topic: Ip cam and router  (Read 6355 times)

bradbutner

  • Newbie
  • *
  • Posts: 4
    • View Profile
Ip cam and router
« on: July 24, 2012, 10:05:10 AM »
Im running a Mac with a USB cam running on icam as well as an iPod touch cam and an iPhone 4 cam running on ipcam.  I also have an xp running with 2 USB cams through icam. Since installing ipcam I'm having to restart my router almost daily.  Could it be related or just coincidence?  Before I dig too deep, I just wanted to pose the question.  Thanks.
Logged

SKJM Support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1918
    • View Profile
Re: Ip cam and router
« Reply #1 on: July 26, 2012, 07:26:49 AM »
Does the router work fine if you do not use ipCam? Please try running ipCam on just one of the devices to see if that improves stability.
« Last Edit: August 13, 2012, 05:34:02 PM by SKJM Support »
Logged

bradbutner

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: Ip cam and router
« Reply #2 on: August 12, 2012, 06:49:54 PM »
Yes, wireless seems to be fine unless I cut IPCam on in addition to my regular webcams run through icamsource.
Logged

SKJM Support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1918
    • View Profile
Re: Ip cam and router
« Reply #3 on: August 15, 2012, 09:26:30 PM »
Does the internet stop working, or does it slow down?

Have you tried running just ipCam?  Do you see this behavior with one ipCam running, or is it only when two are running?

We haven't heard any reports of similar behavior from other users, so we are not sure what may be causing it.
Logged

RichardFudnavis

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: Ip cam and router
« Reply #4 on: September 06, 2012, 04:11:33 AM »
Ok, so i have my main router called SUNSHINE, and connected to SUNSHINE via a LAN cable is my secondary router called SOLAR. both are d-link dir-615 routers. SUNSHINE is used with WPA2-PSK. Linked to that is SOLAR with no security but using mac filtering, no firewall.



Logged

SKJM Support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1918
    • View Profile
Re: Ip cam and router
« Reply #5 on: September 07, 2012, 11:49:39 PM »
Quote from: RichardFudnavis on September 06, 2012, 04:11:33 AM
Ok, so i have my main router called SUNSHINE, and connected to SUNSHINE via a LAN cable is my secondary router called SOLAR. both are d-link dir-615 routers. SUNSHINE is used with WPA2-PSK. Linked to that is SOLAR with no security but using mac filtering, no firewall.

Since your local network has two routers, you'll need to put one into "Bridge mode" so that there's only one router on your network.

For further instructions please see the section called "Connect To  Another Router" on page 73 of your User's Manual here: http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&ved=0CCIQFjAA&url=http%3A%2F%2Fwww.dlink.com%2Fus%2Fen%2Fbusiness-solutions%2Fsupport%2Fproduct%2F-%2Fmedia%2FConsumer_Products%2FDIR%2FDIR%2520615%2Fmanual%2FDIR_615_Manual_RevA_v1_US.ashx&ei=QIlKUMGPF-WM2gXl04HQCQ&usg=AFQjCNGHIf7oCFOq171L9L5DyvtsgAj2NA
Logged
Pages: [1]
« previous next »