DCS-DCS5300G

[minfusu]

I have DCS-5300G wifi IP camera, and working great with D-link unility but ICam even the server is connected successful.  The image from IP Camera is not shown on both computer and Pad with Icam. ( Note: built-in WEB cam is working great when I set in USB/Built-in mode)
I have setup URL at http://192.168.1.xxx ( camrea IP)  with MJPEG or Jpeg .
And auto-Config Router feed back UPnP Sucess 12000 as well.

Any one can help? appreciate~

[SKJM Support]

We haven't tested with that particular camera, but if it outputs MJPEG formatted data, it'll probably work with iCamSource.

You can check to see if you are using the correct MJPEG or JPEG URL here: http://skjm.com/icam/mjpeg_test.php

When you enter the camera's IP address and port into that web page, it will attempt to connect to the camera using all of the common MJPEG and JPEG URLs that we are aware of. If any of the URLs produce an image, then that is the URL to use in iCamSource.

If your camera requires a login and password, you can enter them in that webpage right before the address : login:password@Camera_address