Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Superpuppy

Pages: [1]
1
iCam Support / HTTP/1.1 500 Internal Server Error
« on: October 21, 2014, 06:48:27 PM »
I have ICam working with:
3x Foscam FI9821W
1x Sharx Security SCNC3905
1x Old D-Link 6620G
1x Old Logitech USB Cam

Everything works fine except two of the three Foscam cameras I get a HTTP/1.1 500 Internal Server Error underneath where I should be seeing the video.

All three Foscam cameras have the same login/password, and they are one number apart from each other with the IP:Port address.
I have repeatedly copied and pasted the URL in my ICamSource from the working Foscam to the non working ones, only correcting the IP:Port to match the other cameras.
I quadrupled checked the login/passwords on the non working cameras

I am able to log into all three Foscam cameras locally and from remote computers and view videos from all three cameras.

What seems to be the problem here?
Thank you

2
iCam Support / Re: Auto-Start Multiple Cameras
« on: August 18, 2009, 12:41:05 AM »
It didn't quite work exactly as you suggested...
It has been probably at least 30 years since I last wrote a batch file...  I tinkered with it and I got it to work this way:

    C:
    cd\
    cd C:\Program Files\iCamSource
    start iCamSource.exe -url=http://192.168.0.100:8201/cgi-bin/video.jpg -cu=MyLogin -cp=MyPassword
    start iCamSource.exe -url=http://192.168.0.99:8202/cgi-bin/video.jpg -cu=MyLogin -cp=MyPassword
    start iCamSource.exe -v=0 -a=0

No worries, it only took a few minutes to figure it out
Thanks for your help.

3
iCam Support / Auto-Start Multiple Cameras
« on: August 17, 2009, 01:10:37 PM »
I have a set-up that involves 2 IP cameras and a USB Camera.
I had everything running perfectly in minutes after I installed your program, Awesome!!!!   :)

I would like to have it auto-start with all three cameras every time I boot the PC
I put 3 links in the start-up menu, but that didn't work.
When I manually start-up 3 instances of the program after I boot up the computer, each instance loads up the same camera, I have to manually change it

Pages: [1]