Messages

1

iCam Support / Re: cannot install software: runtime library c++ does not succeed.

« on: November 14, 2010, 04:42:25 PM »

vcredist_x86.exe is an installer from Microsoft to install components required for software created with Visual Studio, so it should install on the vast majority of systems with out problems.

I searched for the error code (1603) and found some people were getting that error because they had security software that was blocking the installation.  Please temporarily quit or disable any security software (antivirus/malware) to see if you are able to install the vcredist package.  Once it's installed, you should be able to run your security software again without any problem.

I think your software does not support 64bit computers....

I disabled Avasti wihout any result
Help

2

iCam Support / Re: cannot install software: runtime library c++ does not succeed.

« on: November 14, 2010, 06:17:12 AM »

vcredist_x86.exe is an installer from Microsoft to install components required for software created with Visual Studio, so it should install on the vast majority of systems with out problems.

I searched for the error code (1603) and found some people were getting that error because they had security software that was blocking the installation.  Please temporarily quit or disable any security software (antivirus/malware) to see if you are able to install the vcredist package.  Once it's installed, you should be able to run your security software again without any problem.

I disabled Avasti wihout any result
Help

3

iCam Support / Re: cannot install software: runtime library c++ does not succeed.

« on: November 12, 2010, 02:19:45 PM »

The iCamSource installer is trying to install the libraries automatically.  Since it won't install automatically, you can try installing it manually.

Please download and run this file (Visual C++ Redistributable Package): http://skjm.com/icam/vcredist_x86.exe

Does not work.
I get THE Same problemen: cannot install...

4

iCam Support / could not install: runtime c++ problem installing:

« on: November 10, 2010, 10:53:22 AM »

The log I get says:

The following properties have been set:
Property: [AdminUser] = true {boolean}
Property: [ProcessorArchitecture] = AMD64 {string}
Property: [VersionNT] = 5.1.2 {version}
Running checks for package '.NET Framework 2.0 (x86)', phase BuildList
Running external check with command 'C:\Users\touch\AppData\Local\Temp\VSD59B.tmp\DotNetFX\dotnetchk.exe' and parameters ''
Process exited with code 1
Setting value '1 {int}' for property 'DotNetInstalled'
Reading value 'Version' of registry key 'HKLM\Software\Microsoft\Internet Explorer'
Read string value '8.0.7600.16385'
Setting value '8.0.7600.16385 {string}' for property 'IEVersion'
The following properties have been set for package '.NET Framework 2.0 (x86)':
Property: [DotNetInstalled] = 1 {int}
Property: [IEVersion] = 8.0.7600.16385 {string}
Running checks for command 'DotNetFX\instmsia.exe'
Result of running operator 'ValueExists' on property 'VersionNT': true
Result of checks for command 'DotNetFX\instmsia.exe' is 'Bypass'
Running checks for command 'DotNetFX\WindowsInstaller-KB893803-v2-x86.exe'
Result of running operator 'ValueExists' on property 'Version9x': false
Result of running operator 'VersionLessThan' on property 'VersionNT' and value '5.0.3': false
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.0': true
Result of checks for command 'DotNetFX\WindowsInstaller-KB893803-v2-x86.exe' is 'Bypass'
Running checks for command 'DotNetFX\dotnetfx.exe'
Result of running operator 'ValueNotEqualTo' on property 'DotNetInstalled' and value '0': true
Result of checks for command 'DotNetFX\dotnetfx.exe' is 'Bypass'
'.NET Framework 2.0 (x86)' RunCheck result: No Install Needed
Running checks for package 'Visual C++ Runtime Libraries (x86)', phase BuildList
Running MsiProductCheck with ProductCode '{E503B4BF-F7BB-3D5F-8BC8-F694B1CFF942}'
MsiQueryProductState returned '-1'
Setting value '-1 {int}' for property 'VCRedistInstalled'
The following properties have been set for package 'Visual C++ Runtime Libraries (x86)':
Property: [VCRedistInstalled] = -1 {int}
Running checks for command 'vcredist_x86\vcredist_x86.exe'
Result of running operator 'ValueGreaterThanEqualTo' on property 'VCRedistInstalled' and value '3': false
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
Skipping FailIf because Property 'Version9X' was not defined
Result of running operator 'VersionLessThan' on property 'VersionNT' and value '5.00': false
Result of checks for command 'vcredist_x86\vcredist_x86.exe' is 'Install'
'Visual C++ Runtime Libraries (x86)' RunCheck result: Install Needed
Running checks for package 'Windows Installer 3.1', phase BuildList
The following properties have been set for package 'Windows Installer 3.1':
Running checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1': true
Result of checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is 'Bypass'
'Windows Installer 3.1' RunCheck result: No Install Needed
Installation of components 'Visual C++ Runtime Libraries (x86)' was accepted.
Copying files to temporary directory "C:\Users\touch\AppData\Local\Temp\VSD59B.tmp\"
Copying from 'C:\Program Files (x86)\iCamSource\AppData\vcredist_x86\vcredist_x86.exe' to 'C:\Users\touch\AppData\Local\Temp\VSD59B.tmp\vcredist_x86\vcredist_x86.exe'
Verifying file integrity of C:\Users\touch\AppData\Local\Temp\VSD59B.tmp\vcredist_x86\vcredist_x86.exe
WinVerifyTrust returned 0
File trusted
Running checks for package 'Visual C++ Runtime Libraries (x86)', phase BeforePackage
Running MsiProductCheck with ProductCode '{E503B4BF-F7BB-3D5F-8BC8-F694B1CFF942}'
MsiQueryProductState returned '-1'
Setting value '-1 {int}' for property 'VCRedistInstalled'
The following properties have been set for package 'Visual C++ Runtime Libraries (x86)':
Property: [VCRedistInstalled] = -1 {int}
Running checks for command 'vcredist_x86\vcredist_x86.exe'
Result of running operator 'ValueGreaterThanEqualTo' on property 'VCRedistInstalled' and value '3': false
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
Skipping FailIf because Property 'Version9X' was not defined
Result of running operator 'VersionLessThan' on property 'VersionNT' and value '5.00': false
Result of checks for command 'vcredist_x86\vcredist_x86.exe' is 'Install'
'Visual C++ Runtime Libraries (x86)' RunCheck result: Install Needed
Verifying file integrity of C:\Users\touch\AppData\Local\Temp\VSD59B.tmp\vcredist_x86\vcredist_x86.exe
WinVerifyTrust returned 0
File trusted
Installing using command 'C:\Users\touch\AppData\Local\Temp\VSD59B.tmp\vcredist_x86\vcredist_x86.exe' and parameters ' /q:a '
Process exited with code 1603
Status of package 'Visual C++ Runtime Libraries (x86)' after install is 'InstallFailed'

5

iCam Support / cannot install software: runtime library c++ does not succeed.

« on: November 10, 2010, 10:39:13 AM »

I get the following log when instalation fails:

The following properties have been set:
Property: [AdminUser] = true {boolean}
Property: [ProcessorArchitecture] = AMD64 {string}
Property: [VersionNT] = 5.1.2 {version}
Running checks for package '.NET Framework 2.0 (x86)', phase BuildList
Running external check with command 'C:\Users\touch\AppData\Local\Temp\VSD59B.tmp\DotNetFX\dotnetchk.exe' and parameters ''
Process exited with code 1
Setting value '1 {int}' for property 'DotNetInstalled'
Reading value 'Version' of registry key 'HKLM\Software\Microsoft\Internet Explorer'
Read string value '8.0.7600.16385'
Setting value '8.0.7600.16385 {string}' for property 'IEVersion'
The following properties have been set for package '.NET Framework 2.0 (x86)':
Property: [DotNetInstalled] = 1 {int}
Property: [IEVersion] = 8.0.7600.16385 {string}
Running checks for command 'DotNetFX\instmsia.exe'
Result of running operator 'ValueExists' on property 'VersionNT': true
Result of checks for command 'DotNetFX\instmsia.exe' is 'Bypass'
Running checks for command 'DotNetFX\WindowsInstaller-KB893803-v2-x86.exe'
Result of running operator 'ValueExists' on property 'Version9x': false
Result of running operator 'VersionLessThan' on property 'VersionNT' and value '5.0.3': false
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.0': true
Result of checks for command 'DotNetFX\WindowsInstaller-KB893803-v2-x86.exe' is 'Bypass'
Running checks for command 'DotNetFX\dotnetfx.exe'
Result of running operator 'ValueNotEqualTo' on property 'DotNetInstalled' and value '0': true
Result of checks for command 'DotNetFX\dotnetfx.exe' is 'Bypass'
'.NET Framework 2.0 (x86)' RunCheck result: No Install Needed
Running checks for package 'Visual C++ Runtime Libraries (x86)', phase BuildList
Running MsiProductCheck with ProductCode '{E503B4BF-F7BB-3D5F-8BC8-F694B1CFF942}'
MsiQueryProductState returned '-1'
Setting value '-1 {int}' for property 'VCRedistInstalled'
The following properties have been set for package 'Visual C++ Runtime Libraries (x86)':
Property: [VCRedistInstalled] = -1 {int}
Running checks for command 'vcredist_x86\vcredist_x86.exe'
Result of running operator 'ValueGreaterThanEqualTo' on property 'VCRedistInstalled' and value '3': false
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
Skipping FailIf because Property 'Version9X' was not defined
Result of running operator 'VersionLessThan' on property 'VersionNT' and value '5.00': false
Result of checks for command 'vcredist_x86\vcredist_x86.exe' is 'Install'
'Visual C++ Runtime Libraries (x86)' RunCheck result: Install Needed
Running checks for package 'Windows Installer 3.1', phase BuildList
The following properties have been set for package 'Windows Installer 3.1':
Running checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1': true
Result of checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is 'Bypass'
'Windows Installer 3.1' RunCheck result: No Install Needed
Installation of components 'Visual C++ Runtime Libraries (x86)' was accepted.
Copying files to temporary directory "C:\Users\touch\AppData\Local\Temp\VSD59B.tmp\"
Copying from 'C:\Program Files (x86)\iCamSource\AppData\vcredist_x86\vcredist_x86.exe' to 'C:\Users\touch\AppData\Local\Temp\VSD59B.tmp\vcredist_x86\vcredist_x86.exe'
Verifying file integrity of C:\Users\touch\AppData\Local\Temp\VSD59B.tmp\vcredist_x86\vcredist_x86.exe
WinVerifyTrust returned 0
File trusted
Running checks for package 'Visual C++ Runtime Libraries (x86)', phase BeforePackage
Running MsiProductCheck with ProductCode '{E503B4BF-F7BB-3D5F-8BC8-F694B1CFF942}'
MsiQueryProductState returned '-1'
Setting value '-1 {int}' for property 'VCRedistInstalled'
The following properties have been set for package 'Visual C++ Runtime Libraries (x86)':
Property: [VCRedistInstalled] = -1 {int}
Running checks for command 'vcredist_x86\vcredist_x86.exe'
Result of running operator 'ValueGreaterThanEqualTo' on property 'VCRedistInstalled' and value '3': false
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
Skipping FailIf because Property 'Version9X' was not defined
Result of running operator 'VersionLessThan' on property 'VersionNT' and value '5.00': false
Result of checks for command 'vcredist_x86\vcredist_x86.exe' is 'Install'
'Visual C++ Runtime Libraries (x86)' RunCheck result: Install Needed
Verifying file integrity of C:\Users\touch\AppData\Local\Temp\VSD59B.tmp\vcredist_x86\vcredist_x86.exe
WinVerifyTrust returned 0
File trusted
Installing using command 'C:\Users\touch\AppData\Local\Temp\VSD59B.tmp\vcredist_x86\vcredist_x86.exe' and parameters ' /q:a '
Process exited with code 1603
Status of package 'Visual C++ Runtime Libraries (x86)' after install is 'InstallFailed'