Messages

1

iCam Support / Re: iCant get it to work :(

« on: May 09, 2011, 05:26:55 PM »

UDP Port 12000 is BLOCKED
With my Mac's firewall disabled and my routers firewall disabled.

But after some reading I've learned that even if the routers firewall is disabled it still needs some rules or something to communicate.

But I just can't figure it out! 

I stumbled on this link:
http://www.zyxeltech.de/previews/p2602hwnlid7a/rpSys.html
This is just as if you can acces my router (although its a slightly different model)
Only thing not showing up on that site is if your make a new rule.
Here I get another input screen that is not showing up on that website.
But if needed I will make a screenshot.

I've tried, after disabling the firewall, on my router:

under "advanced"
enabling uPnP
Port 12000 still blocked from website port checker

After disabling uPnP I tried to manually port forward port 12000-12000 to my mac's ip adres 192.168.1.xx
Tried numerous settings to permit port 12000 under 'user define' in the NAT settings.
Tried making firewall rules (with firewall on and of) with UDP permitted from 'any adress' and tried 'wan to lan', 'lan to wan' ect. settings..
Restored default router settings numerous times to ensure things didn't conflict.

I was trying to let my router permit everything and then go from there to more save settings but port 12000 keeps being blocked.

_{Ending this post I would like to thank you for your time and support given already! 
I'm no computer noob but this network thing is beating me! Now more then ever I regret i'din't took the cisco course!}

2

iCam Support / Re: iCant get it to work :(

« on: May 08, 2011, 06:27:33 AM »

I Still can't get it to work 
The ' ghost' cam was indeed from another user.. I saw somethings I wish I had never seen! 

What do I need to change in order to get it to work over 3G?! 

Now the $5 app is useless to my and I hate making bad investments!

3

iCam Support / Re: iCant get it to work :(

« on: April 24, 2011, 09:14:04 AM »

So what to do next to get it working over 3G?
Do I need to port forward to get it working from outside my wifi?

I know how I can change some thing in my router but my knowledge about networks is little.
Even with this link i'm still not sure how to set it up.
http://portforward.com/english/routers/port_forwarding/ZyXEL/P-2602HW-D1A/default.htm

4

iCam Support / Re: iCant get it to work :(

« on: April 24, 2011, 04:29:44 AM »

Appears I have a ghost cam 
Stream works on wifi without auto-config enabled.
Stream quits after 15-20sec after enabling EyeToy Audio
Stream doesn't work over 3G network only wifi



Uploaded with ImageShack.us



Uploaded with ImageShack.us

5

iCam Support / Re: iCant get it to work :(

« on: April 23, 2011, 04:09:10 AM »

Yeah I did, I forgot to mention in enthusiasm that I managed to get it working in OSX 10.6.7
(with settings mentioned above)

For the record:
Snow Leopard 10.6.7
Router: ZyXEL P-2602HW-D1A
iCamSource 2.2.2.1 with (PortRangeSet -bool true)
macam 0.92 CVS
iPhone 4 (4.3.1) with iCam 2.0.1

Router settings:
Default router settings with uPNP and WPA2 enabled
Active the Universal Plug and Play(UPnP) Feature (checked)
Allow users to make configuration changes through UPnP (not checked)

iCamSource settings:
Audio - No Audio
Video - 1 - macam #0: Sony Eye Toy (2)
Auto-Config Router (not checked)
Port Forward Range (not checked)
Motion Detection - Off

macam settings:
Format - SIF (320x240)
Rate - 5 fps
Reduce bandwith (checked)
Led (checked)


What's working:
With above settings I managed to get the stream to iPhone on the same wifi network

What ain't working is:
Audio:
When I enable audio it quits stream after few seconds or I get black screen with strange red dot in there.

Over mobile network:
I get black screen on iPhone with strange red dot

When checked the Auto-Config Router I got the same black with red dot even on wifi.



Uploaded with ImageShack.us

6

iCam Support / Re: iCant get it to work :(

« on: April 23, 2011, 02:58:46 AM »

My firewall in my mac is disabled and also my firewall in my router is disabled.
When I am not selecting auto-router config and disable the audio, it works on my iPhone connected on the same wifi network.
But if I select auto-router config it only shows black screen.

So there's nothing blocking in that part.
Audio is a 'no go' but why? To much data?

And my biggest issue I can't connect from outside my wifi this needs port forwarding or some setup I assume?!

Hoping for some support cause setting this up is quitte a hassle for me!

7

iCam Support / Re: iCant get it to work :(

« on: April 21, 2011, 03:26:23 PM »

There is progress..

I connected my EyeToy with following settings:
SIF (320x240) Rate 5 fps [X] Reduce bandwith

ZyXEL P-2602HW-D1A
[X] Active the Universal Plug and Play(UPnP) Feature
[ ] Allow users to make configuration changes through UPnP

When I disable "Auto-Config Router" in iCamSource
I've got video stream on my iPhone!! 
But it kept closing after 15-25sec only when I disabled the audio its running fine on wifi.

But now I have no sound and with 3G internet connection on iPhone it only shows black 

8

iCam Support / Re: iCant get it to work :(

« on: April 21, 2011, 04:42:03 AM »

Thnx for you reply!

I removed the firewall forwarding rule and enabled uPNP.
iCamSource (2.2.2) states: uPNP Succes 12000 ->12000 with ' auto-config router' enabled.

iCam (2.01) on my iPhone says after loading for a while ' Source Connection Error' that is on 3G and with Wifi (same network)

I'm lost what to do now  

9

iCam Support / iCant get it to work :(

« on: April 20, 2011, 02:45:27 PM »

I have an EyeToy (SLEH-00031) I couldn't get it to work with macam on my mac (running SL 10.6.7 if my memory is good it was working on previous versions)
So i'm running a windows XP via parallels on my mac were the EyeToy works fine!

But I can't connect from my iPhone 
Tried setting up my router with uPNP enabled and port forward 12000 to 121000 to different ip's.
uPNP Succes 12000-12100 --> Source Connection Error

My EyeToy works (in paralells), iCam 'works' but the program is now useless to me