Messages

1

iCam Support / iCam picture aspect ratio

« on: September 16, 2012, 12:40:31 PM »

Hi,

I have two HD cameras and one Standard Definition camera hooked up to iCam. I am noticing there is no way to set a 16x9 aspect ratio for the HD cameras. All the images are coming in at 4x3 aspect ratio. Am I missing a setting?

Thanks

2

iCam Support / Re: Auto-Start Multiple Cameras

« on: January 05, 2010, 08:09:29 PM »

You mean there is a manual?   

3

iCam Support / Re: Auto-Start Multiple Cameras

« on: January 04, 2010, 08:36:57 PM »

OK, Just tested the audio too. It is also off by one - 0=1, 1=2, 2=3 etc..  (in the list)  So now everything here loads as expected with that adjustment - Is it just me? I have seen no one else mention this.

4

iCam Support / Re: Auto-Start Multiple Cameras

« on: January 04, 2010, 08:29:32 PM »

OK, I think I figured it out. I have 3 sources - Should be 1,2 and 3  -- It seems to start the count at 0.  So if I use 0,1 and 2 all is well. Make sense?  Not sure about the audio though.

Tim--

5

iCam Support / Re: Auto-Start Multiple Cameras

« on: January 03, 2010, 12:20:43 PM »

A little more messing around, and I think I found out why I was getting a 4th. I had the tuner card activated at the time. I turned of the TV card, and now only 3 startup. Which leads to my next issue.  The three sources I have loading are two cameras and a TV tuner card. When I run the batch file, one of the cameras comes up with a source that doesn't exist. It has a IP camera in the list and I get a error dialog box that says, "Error Code 11.  Your camera drivers may need to be updated" I understand this is because that camera doesn't exist, but I wonder why it tries to start a camera that is 4th in the list, and I only ask for sources 1,2 and 3 to load. ?

Thanks for your time!

6

iCam Support / Re: Auto-Start Multiple Cameras

« on: January 02, 2010, 08:56:54 PM »

Hi,

NooB here.  I am trying to setup multi start - I get a 4th instance of iCamSource for some reason -

 I have tried this as a setup for batching:
----
G:

cd G:\Internet-MoBo\Internet-LAN\iCamSource\

start iCamSource.exe -v=1 -a=2 -cu=x -cp=x

start iCamSource.exe -v=2 -a=1 -cu=x -cp=x

start iCamSource.exe -v=3 -a=1 -cu=x -cp=x

--------

I do not have any IP cameras.. Can anyone tell me why the 4th instance happens?  


Thanks

7

iCam Support / ProcAmp and other feature requests.

« on: January 02, 2010, 08:34:17 PM »

First off, Awesome job, great app!  Worth the 5 bucks. 

Feature Requests from me: A way to adjust the different levels of the video in the cameras. A proc-amp type interface.
Multiple delete option for events.
Email notifications, for when I do not have the itouch handy.
a GUI for the PC side, to run multiple cameras, not having to run multiple sessions of iCamSource.

Not a feature request, but a question.
I've had a hard time getting the play and FF/RW buttons to 'press' when in the event view mode screen- Is this a bug? Or just a problem on my end?

Thanks!

VoSot