Messages

1

iCam Support / Re: iCam Source crashing iMac

« on: December 31, 2013, 11:54:49 AM »

I'm running 2 cameras.   A foscam F9821W with latest firmware, and a Chinese copy of a foscam 8905.   I should say everything worked fine for months,  it may have started around the time of updating to Mavericks,  can't be sure though.

The CPU averages 20% when iCam source is running.

Just a side note,  I use two user accounts on my Mac.  When the other user account is logged in (the one without iCam source installed) it seems to have the problem with the computer restarting.

2

iCam Support / iCam Source crashing iMac

« on: December 19, 2013, 07:49:29 AM »

When I am running iCam Source on my MAC,  OS X 10.9.1  it appears to be the cause of crashes and automatic restarts.   The error log message that shows is this:


panic(cpu 4 caller 0xffffff80042dc19e): Kernel trap at 0xffffff7f85aebc28, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x00000000000024cc, CR3: 0x000000020c20c113, CR4: 0x00000000001606e0
RAX: 0xffffff8044f84100, RBX: 0xffffff81b37e2000, RCX: 0x0000000000000000, RDX: 0xffffff81d476b900
RSP: 0xffffff81d476b8e0, RBP: 0xffffff81d476b930, RSI: 0x000000007fffffff, RDI: 0xffffff8045205300
R8:  0xffffff8241fbe03c, R9:  0x0000000000000000, R10: 0x0000000000000001, R11: 0x0000000000000000
R12: 0x0000000000000001, R13: 0xffffff81b37e2178, R14: 0x00000000000024cc, R15: 0xffffff81b37e3150
RFL: 0x0000000000010246, RIP: 0xffffff7f85aebc28, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0x00000000000024cc, Error code: 0x0000000000000003, Fault CPU: 0x4

Backtrace (CPU 4), Frame : Return Address
0xffffff81d476b570 : 0xffffff8004222f69
0xffffff81d476b5f0 : 0xffffff80042dc19e
0xffffff81d476b7c0 : 0xffffff80042f3606
0xffffff81d476b7e0 : 0xffffff7f85aebc28
0xffffff81d476b930 : 0xffffff7f85af0e3f
0xffffff81d476b960 : 0xffffff7f85af0d73
0xffffff81d476b980 : 0xffffff7f85af060b
0xffffff81d476b9c0 : 0xffffff7f85a776de
0xffffff81d476b9f0 : 0xffffff7f85a83031
0xffffff81d476ba50 : 0xffffff7f85af0fe0
0xffffff81d476ba90 : 0xffffff7f85a75d05
0xffffff81d476bb20 : 0xffffff80046cccda
0xffffff81d476bb40 : 0xffffff80046cd83e
0xffffff81d476bba0 : 0xffffff80046cb28f
0xffffff81d476bcf0 : 0xffffff80042b6008
0xffffff81d476be00 : 0xffffff8004226bb1
0xffffff81d476be30 : 0xffffff80042139b5
0xffffff81d476bea0 : 0xffffff800421e003
0xffffff81d476bf20 : 0xffffff80042c90dd
0xffffff81d476bfb0 : 0xffffff80042f3bd8
      Kernel Extensions in backtrace:
         com.apple.iokit.IOAcceleratorFamily(98.7.1)[024BF8EC-2925-3C4B-ADBB-CFE36F7D41C5]@0xffffff7f85a6c000->0xffffff7f85ac4fff
            dependency: com.apple.iokit.IOPCIFamily(2.[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff7f848ba000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0xffffff7f84ba6000
         com.apple.GeForce(8.1.[68DC25D4-7371-3980-BBFB-FD4473EBD8B8]@0xffffff7f85ad1000->0xffffff7f85b5ffff
            dependency: com.apple.iokit.IOAcceleratorFamily(98.7.1)[024BF8EC-2925-3C4B-ADBB-CFE36F7D41C5]@0xffffff7f85a6c000
            dependency: com.apple.iokit.IOPCIFamily(2.[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff7f848ba000
            dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xffffff7f84be9000
            dependency: com.apple.nvidia.driver.NVDAResman(8.1.[3A2A3C2D-E129-3190-A682-E831B38F0FBF]@0xffffff7f84bf9000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0xffffff7f84ba6000

BSD process name corresponding to current thread: iCamSource

3

iCam Support / Re: Foscam FI9821W support H.264

« on: June 08, 2013, 08:36:43 PM »

No PTZ will not work as well it wont be 720P.

From what I can find LiveCamsPro app is what will support this camera with PTZ and 720p. 

4

iCam Support / Re: Foscam FI9821W support H.264

« on: April 09, 2013, 11:41:15 PM »

For anyone trying to get Foscam FI9821W to work with iCam.  These are the steps to take:

(1)Follow the instructions on this link to put one of the streams into MJPEG mode.   This needs to be done because the factory default has both streams in h.264 mode, which will not work with iCam.

http://foscam.us/forum/how-to-get-jpg-pictures-and-mj-stream-on-fi9821w-fi9801-02w-t4328.html

(2)Then use this command:  http://ip address:port/cgi-bin/CGIStream.cgi?cmd=GetMJStream&usr=admin&pwd=xxx

With ip address:port changed to yours and xxx being your camera's login password.

This command goes in the URL space in iCam Source.  Leave the Camera login and password both empty.

Hit start and your FI9821 camera should show up.



 

5

iCam Support / Re: Foscam FI9821W support H.264

« on: April 07, 2013, 10:54:28 PM »

this command in the browser works for foscam FI9821W with the latest firmware


http://ip address:port/cgi-bin/CGIStream.cgi?cmd=GetMJStream&usr=admin&pwd=xxx

6

iCam Support / Re: Foscam FI9821W support H.264

« on: April 05, 2013, 12:52:27 AM »

deleted

7

iCam Support / Re: Foscam FI9821W support H.264

« on: April 04, 2013, 05:06:16 PM »

im getting 404 - not found in browser and in icam now.  double checked url address, all looks ok. 

8

iCam Support / Re: Foscam FI9821W support H.264

« on: April 03, 2013, 08:52:35 PM »

tired that but get this error:  HTTP Error 302 - Moved temporarily

9

iCam Support / Foscam FI9821W support H.264

« on: April 03, 2013, 04:09:22 PM »

I can't find any info on support for Foscam Fi9821W H.264 cameras.   I know previous posts have said there is no support for H.264 cameras,  has this changed yet?