Messages

1

iCam Support / Re: Wansview W2 - set-up authorization error - i'm stumped!?!

« on: January 10, 2017, 03:33:49 AM »

I had to restart my iMac this morning after a Sierra update. iCamsource fired back up, and weirdly the Wansview started working! 

I'm not sure what's changed, but whatever it is it did the trick. I'll keep monitoring it and let you know if anything changes.

Cheers

2

iCam Support / Re: Wansview W2 - set-up authorization error - i'm stumped!?!

« on: January 08, 2017, 01:31:52 PM »

Here is a link to a test version of the iCamSource that supports Digest authentication: http://skjm.com/icam/iCamSource2.8.5.2.dmg

Please let us know how it goes. Thanks! 

That was quick, thanks!

Anyway, no 401 error, which is good. But... I get this after about 5 seconds...

"Cannot find JPEG data. Your network camera may not be supported. Please click the  "?" button to verify your camera's  Camera URL"

I'm using the same http://xxx.xxx.x.xx/mjpeg/stream.cgi MJPEG URL as I have entered into the Pro beta version you gave for me to download, which works.

3

iCam Support / Re: Wansview W2 - set-up authorization error - i'm stumped!?!

« on: January 08, 2017, 06:56:08 AM »

Got it working in your beta iCamSource Pro! 

The MJPEG URL i used is http://xxx.xxx.x.xx/mjpeg/stream.cgi

That works for this Wansview W2 camera. Hope that info helps you moving forward with your supported camera list.

Thanks for all your help.

Excellent news! We will probably have a version of the iCamSource for you to trying within the next day or so. 

Brilliant - I look forward to it. Happy to beta test anything you need.

4

iCam Support / Re: Wansview W2 - set-up authorization error - i'm stumped!?!

« on: January 07, 2017, 05:53:12 AM »

Got it working in your beta iCamSource Pro! 

The MJPEG URL i used is http://xxx.xxx.x.xx/mjpeg/stream.cgi

That works for this Wansview W2 camera. Hope that info helps you moving forward with your supported camera list.

Thanks for all your help.

5

iCam Support / Re: Wansview W2 - set-up authorization error - i'm stumped!?!

« on: January 07, 2017, 05:20:43 AM »

duplicate of above post, please delete.

6

iCam Support / Re: Wansview W2 - set-up authorization error - i'm stumped!?!

« on: January 07, 2017, 05:01:03 AM »

Thanks Stefan - using that download, when i try to connect it comes back with "400 - Error". The 400 error message clears after a few seconds and gets replaced by... "Cannot find JPEG data. Your network camera may not be supported. Please click the  "?" button to verify your camera's  Camera URL"

I am assuming the problem is probably the URL to access the mjpeg stream. I've tried several but to no avail, it simply hits back the 400 error message each time...

7

iCam Support / Re: Wansview W2 - set-up authorization error - i'm stumped!?!

« on: January 06, 2017, 01:35:40 AM »

In looking through the headers, you should see an "Authorization" item. If you do, does it say "Basic" or "Digest" next to it?

Hi Stefan - it says Digest, which I am assuming is encrypted?

Ah, that is why you are seeing the 401 error. The iCamSource currently only supports Basic authentication. Digest authentication is more secure, but it is more complicated. We are currently working on bringing Digest authentication to the iCamSource Pro (for iCam Pro) and then after that we will add it to the iCamSource (for iCam).

Basic Authentication: https://en.wikipedia.org/wiki/Basic_access_authentication
Digest Authentication: https://en.wikipedia.org/wiki/Digest_access_authentication

Oh that's a shame

It looks like I'll have to find another bit of software to use.

Thanks anyway, and thanks to the guys for providing a great bit of software that I could use for the last few years.

Cheers

8

iCam Support / Re: Wansview W2 - set-up authorization error - i'm stumped!?!

« on: January 05, 2017, 02:30:11 PM »

In looking through the headers, you should see an "Authorization" item. If you do, does it say "Basic" or "Digest" next to it?

Hi Stefan - it says Digest, which I am assuming is encrypted?

9

iCam Support / Re: Wansview W2 - set-up authorization error - i'm stumped!?!

« on: January 05, 2017, 09:04:37 AM »

Hi Stefan

Thanks for your replies, the password authentication type did cross my mind because from a search on here I saw a post from somebody earlier in 2016 who had the same problem with a different brand camera. They changed their authentication type in the camera's interface which solved the problem, but sadly the Wansview doesn't have that option to change.

When I get home from work tonight I'll have a look at your suggestions and update/email you accordingly.

Thanks again
Kevin

10

iCam Support / Wansview W2 - set-up authorization error - i'm stumped!?!

« on: January 05, 2017, 03:20:06 AM »

As an iCamsource (and iCam) user for the past 4 years, I have had 4x FI8910W's all running smoothly without problem. iCamsource runs on my iMac and iCam on my iPhone, all over my home Wifi Network.

This week I decided to add a new external camera to the system, I ordered a Wansview W2 (specs at the bottom of the page), used the proper URL's and set it up just like the existing foscam's, but no matter what I do I just get a 401 webcam authorization error in iCamsource, telling me the u/n and p/w to the Wansview is wrong.

I can access the camera pictures through my browser and I've tested it on the Wansview app, and it works without problem. I've changed and changed back the camera u/n and p/w, reset them, reset the camera totally etc, but nothing seems to work.

I've tried to get a working picture form this page: http://skjm.com/icam/mjpeg_test.php but none of them gives me a response, all URL's error.

The wansview uses H.264/MJPEG so I assumed (perhaps incorrectly?) that it would work with iCamsource.

Any advice would be welcomed.

Many thanks

11

iCam Support / Re: BT Homehub 3, Source Connection Error, Port fowarding - HELP?

« on: June 30, 2012, 08:53:14 AM »

**SOLVED** I finally got it to work!  

For Port Forwarding, I would recommend anybody having trouble to view this step by step guide: http://www.youtube.com/watch?v=xXvkBMqU6P4

After following this to the letter iCam now works a treat over 3G.

12

iCam Support / BT Homehub 3, Source Connection Error, Port fowarding - HELP?

« on: June 29, 2012, 03:32:43 PM »

I'll keep it short and sweet:

iMac (running OSX 10.7.4)
BT Homehub 3 (iMac connected directly to it via WiFi)
iCamsource 2.4.4 running on the iMac
2x foscam F18910W's being used wirelessly through the BT Homehub 3
No firewalls, no restictions.

 - The iCam app on my iPhone and iPad will connect fine if I am using the same BT Homehub 3 Wifi network, however when on 3G I get the "Source Connection Error" message. I've read about Port forwarding, however on portforward.com there's no option for the Homehub 3.

- I've tried 'Auto config', and it says "success", but no joy
- I've logged into the HH3 control panel and tried switching off the firewall, but no joy.
- I've logged into the HH3 control panel and made sure UPnP is enabled, but no joy.

I'm a bit stuck as I bought this app purely so I can monitor my dog when I am work. I know my way around most settings, but I'm a bit stumped here and I'm afraid I'm going to do more damage than good if I continue...

Help?  

Thanks in advance.