Messages

1

iCam Support / Re: Possible AT&T 3G Changes Coming for iOS Devices Running iCam?

« on: November 15, 2011, 09:32:33 PM »

Thank you for the explanation on how Todnido differs from iCam.

I'm still wondering how to approach AT&T wireless with this issue, as I believe it is theirs.  Any suggestions?

2

iCam Support / Re: Possible AT&T 3G Changes Coming for iOS Devices Running iCam?

« on: November 12, 2011, 02:04:34 PM »

Since this seems to be a problem only with AT&T Cell (3G) network connections,  I think they must be doing some unnecessary blocking of your UDP packets.

BTW, I don't have the AT&T problem with other "iPad to PC" apps (like Tonido).

How would I explain this issue to AT&T support?

If AT&T can't help, I guess my new 3G devices will be with Verizon.

Thanks,

3

iCam Support / Re: Possible AT&T 3G Changes Coming for iOS Devices Running iCam?

« on: November 11, 2011, 05:48:38 PM »

I do not have access to the routers.  I should have mentioned that this behavior is on 2 different local Networks and 3 different computers running icamsource.

Am I just out of luck using iCam with AT&T 3G?  My Verizon 3G iCam works, as does WIFI on all Networks and Computers without port forwarding.

4

iCam Support / Re: Possible AT&T 3G Changes Coming for iOS Devices Running iCam?

« on: November 07, 2011, 09:36:15 PM »

I'm having similar problems.
3G on ATT Ipad - does not work, source connection error, broker server
3G on Verizon Android - Works
WIFI anywhere - Works

ATT IP starts with 198 in So. Cal.
198.228.212.142

Have you tried checking the Auto-Config Router checkbox in the iCamSource before clicking the Start button? If that doesn't work, please let us know what status message appears next to the Auto-Config Router checkbox when you run iCamSource with that option enabled.

I tried the Auto-Config router - status message is: UPnP Success 12006-> 12006 (click for info)

Still having problems with AT&T 3G using iPad (does not connect)  - Verizon 3G and all WIFI seems to work, as does iCamWeb.

5

iCam Support / Re: Possible AT&T 3G Changes Coming for iOS Devices Running iCam?

« on: November 06, 2011, 12:54:26 PM »

I'm having similar problems.
3G on ATT Ipad - does not work, source connection error, broker server
3G on Verizon Android - Works
WIFI anywhere - Works

ATT IP starts with 198 in So. Cal.
198.228.212.142

6

iCam Support / Re: Possible AT&T 3G Changes Coming for iOS Devices Running iCam?

« on: May 01, 2011, 03:40:19 PM »

Starts with 166
Southern California

3g AT&T Ipad

7

iCam Support / Re: More than 4 cameras and multiple iCam Logins?

« on: March 26, 2011, 10:40:56 AM »

Ok, here is version 2.2.2 of the iCamSource which should fix your different iCam Login / Password combination issue: http://skjm.com/icam/iCamSetup2.2.2.exe

Please let me know how it goes.

Thanks!

Hi Stefan,
The 2.2.2 for Win-7 works with multiple cameras and logins.  I can now see the 4 cameras that I want on the Android.  Thank you for the software fix so quickly.  Great support.

8

iCam Support / Re: More than 4 cameras and multiple iCam Logins?

« on: March 19, 2011, 02:43:37 PM »

Different iCam Logins did not work:  This is what I tried:

Win-7 PC with iCamsource:
Existing:
Camera Dlink, Ethernet url= http://192.168.1.71/video.cgi , iCam Login: msperlin, Password: ........
8 other Enet Cameras with iCam Login=msperlin

Added:
Camera #10  Dlink2, Ethernet url= http://192.168.1.71/video.cgi , iCam Login: csperlin, Password: ........

Stopped iCamSource, re-booted Win-7 PC, Started iCamSource, both cameras (same) appear to work in iCamSource.  Verified iCam logins are different.

On iPad:
Started iCam with iCamlogin=msperlin  Both Dlink and Dlink2 show up along with 8 others on iPad.

Stopped iCam, then restarted with iCamlogin=csperlin -  Message that there are "no sources found"

I tried different iCam Logins for Camera Dlink2, including just clearing out, with same results.

Never tried on Android, as it didn't seem to work right on iPad.

 

Help please.

9

iCam Support / Re: More than 4 cameras and multiple iCam Logins?

« on: March 18, 2011, 03:22:23 PM »

I will give it a try.  Thanks.

Different cameras in an iCamSource can have different iCam Login and Password combinations ... If you add the D-Link a second time with a different login and password that the Android uses you will be able to connect to it separately.

10

iCam Support / Re: Motion Detection Feature request: time-lapse capture.

« on: March 18, 2011, 08:49:49 AM »

Thanks,  it's a common feature on IP cam software, ie: send an E-Mail with recent image every x interval.

11

iCam Support / Re: More than 4 cameras and multiple iCam Logins?

« on: March 18, 2011, 08:38:26 AM »

Is there a time-frame (days, weeks, months) on the future upgrade to support more than 4 cameras on Android?  If its days or weeks, I can wait.

Right now, I'm using 1 Win-7 PC with iCamsource

9 IP Camera sources
   1 Dlink  mjpeg on Local Network
   8 http:  jpg  on Internet

I need to see the Dlink on the Android.  I can get by with random on the other 3 cameras displayed.

 

12

iCam Support / Motion Detection Feature request: time-lapse capture.

« on: March 17, 2011, 03:31:56 PM »

In addition to capturing an image when there is motion detection, I would like to be able to capture an image every x seconds.  I propose adding an "interval"  on the iCamSource motion detection screen to specify a number of seconds, maybe minimum of 1.  For example, setting interval to 60 would capture an image every 60 seconds. I guess you could put a warning that this would increase the CPU and Storage required with any small interval.

This would be great to capture "time lapse" of Web-Cams, without having to do motion detection, just capture the current image every x seconds.

Thanks.

13

iCam Support / More than 4 cameras and multiple iCam Logins?

« on: March 17, 2011, 02:47:09 PM »

My iPad supports up to 16 cameras with 1 iCam login.  However, my Android phone supports only 4 cameras with the same iCam Login.  The 4 cameras displayed on the Android seem to be randomly selected from the 9 I have defined in iCamSource.  The 4 randomly selected cameras are not the specific ones I want displayed.

How can I display a specific 4 cameras on the Android, and all 9 cameras on the iPad?

Do I need to setup up multiple iCam Login ids?  If yes, how do I do this?

Also, I'm using Win-7 64bit for iCamSource.