Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - digitalfx

Pages: [1] 2
1
iCam Support / Re: weather proof IP cam
« on: April 26, 2010, 05:24:23 PM »
You can always buy a standard IP cam and put it in a weatherproof enclosure.

http://www.supercircuits.com/Enclosures/ENCOD-HB

2
iCam Support / Re: iCam Source 1.4.2 keeps crashing on two XP machines.
« on: April 10, 2010, 06:29:16 AM »
After more investigating...

icamsource 1.4.1 with icam 1.3.1 - no crashes just slow to connect sometimes
icamsource 1.4.2 with icam 1.3.1 - crashes randomly on connection from icam from 3G only (not on wifi or edge)
icamsource 1.4.1 with icam 1.3 - no problems
icamsource 1.4.2 with icam 1.3 - no problems

All computers running icamsource are 24/7 with no power saving features turned on.

3
iCam Support / Re: iCam 1.3.1 is Now Available in the App Store!
« on: April 03, 2010, 08:39:23 AM »
Sometimes I get just a generic error other times I get no notification at all where the icon still appears in the task bar but when I mouse over it, it disappears. 

4
iCam Support / Re: iCam 1.3.1 is Now Available in the App Store!
« on: April 01, 2010, 05:28:02 PM »
Both version of icamsource crash with icam 1.3.1.  Not consistently and only ever while trying to connect.  Sometimes only one of the two running on the same machine will crash.

5
iCam Support / Re: iCam 1.3.1 is Now Available in the App Store!
« on: March 31, 2010, 06:15:05 PM »
I've had no luck fixing the crashing with switching icamsource.  It's crashing on three different computers, two with webcam's and one with two IP cams, one megapixel and one standard.  Is there any way I can downgrade to an official icam 1.3?

6
iCam Support / Re: iCam 1.3.1 is Now Available in the App Store!
« on: March 26, 2010, 05:49:39 PM »
That did the trick.  Apparently I had to delete the icamsource directory.  I probably was running 1.4.1 then and the crashing was still happening with the latest version of icam.  I'll test it out again as soon as i'm in a 3g area, as the crashing doesn't seem to happen on edge or wifi.

7
iCam Support / Re: iCam 1.3.1 is Now Available in the App Store!
« on: March 26, 2010, 03:57:54 PM »
Yup, I just cleared my cache and downloaded it again.  Uninstalled all previous versions and the window when opened still says "iCamSource Preferences 1.4.2".  According to Windows Programs and Features it's version 1.4.4.

8
iCam Support / Re: iCam 1.3.1 is Now Available in the App Store!
« on: March 26, 2010, 01:54:57 PM »
Quote from: Stefan on March 25, 2010, 09:48:38 PM
digitalfx - Was iCam 1.3.1 crashing both 1.4.1 and 1.4.2 iCamSources? Or just 1.4.2? Does iCam 1.3 connect fine to 1.4.1 and 1.4.2?

I'm not sure, the link you posted for icamsource 1.4.1 in this thread installs 1.4.2 (or so it says), even after a clean removal of the original program.

9
iCam Support / Re: iCam 1.3.1 is Now Available in the App Store!
« on: March 25, 2010, 06:51:30 PM »
It appears that my icamsource crashing problems are being caused by the new version of icam.  I rolled back to icam 1.3 and the new icamsource hasn't crashed since on any of my computers.

10
iCam Support / Re: iCam 1.3.1 is Now Available in the App Store!
« on: March 24, 2010, 04:32:38 PM »
The link for icamsource 1.4.1 appears to install 1.4.2.  I'm still trying to troubleshoot my crashing problems.

11
iCam Support / Re: iCam 1.3.1 is Now Available in the App Store!
« on: March 23, 2010, 07:28:53 PM »
-desc="Name"

12
Beta Testing / Re: How to Install the iCam Beta onto your iPhone / iPod touch
« on: March 16, 2010, 05:03:26 PM »
I've never had crashing problems before on any of my computers.


EDIT

It appears I was wrong and it's crashing on all three of my windows 7 machines(x86 and x64).  I'm going to load it on my XP box later this week and see if it crashes there too.

13
Beta Testing / Re: How to Install the iCam Beta onto your iPhone / iPod touch
« on: March 15, 2010, 06:31:58 PM »
If I had to guess, I'd say it was around the time I was trying to connect.  I had two instances running and they both crashed at the same moment.

<EDIT>
It is happening on connection.  It crashed again today and I noted the times I connected.  It's not crashing every time and it's only happening on my windows 7 x64 machine.  My x86 machines are unaffected.
</EDIT>

I also found a bug (unrelated to my last post) that appears to be a difference in the motion detection slider between the icamsource and the icam app.  When you adjust it from the icam app on the phone all the way down the slider doesn't move from it's location in icamsource.  The setting is however still set.  If you set it all the way down in the icamsource the slider in the icam app does not go all the way down, only most of the way.  It appears to only be a visual problem.

14
Beta Testing / Re: How to Install the iCam Beta onto your iPhone / iPod touch
« on: March 15, 2010, 04:20:46 PM »
No problems so far except for an icamsource crash today.  Here is the info from the event.

Log Name:      Application
Source:        Application Error
Date:          3/15/2010 11:46:18 AM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      XXXXXXX
Description:
Faulting application name: iCamSource.exe, version: 0.0.0.0, time stamp: 0x4b9a7cfe
Faulting module name: MSVCR90.dll, version: 9.0.30729.4926, time stamp: 0x4a1743c1
Exception code: 0xc0000417
Fault offset: 0x0006c955
Faulting process id: 0x1678
Faulting application start time: 0x01cac2e3eef19aee
Faulting application path: C:\Program Files (x86)\iCamSource\iCamSource.exe
Faulting module path: C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4926_none_508ed732bcbc0e5a\MSVCR90.dll
Report Id: e4e5532b-3049-11df-b441-005056c00008
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-03-15T15:46:18.000000000Z" />
    <EventRecordID>7997</EventRecordID>
    <Channel>Application</Channel>
    <Computer>XXXXXXX</Computer>
    <Security />
  </System>
  <EventData>
    <Data>iCamSource.exe</Data>
    <Data>0.0.0.0</Data>
    <Data>4b9a7cfe</Data>
    <Data>MSVCR90.dll</Data>
    <Data>9.0.30729.4926</Data>
    <Data>4a1743c1</Data>
    <Data>c0000417</Data>
    <Data>0006c955</Data>
    <Data>1678</Data>
    <Data>01cac2e3eef19aee</Data>
    <Data>C:\Program Files (x86)\iCamSource\iCamSource.exe</Data>
    <Data>C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4926_none_508ed732bcbc0e5a\MSVCR90.dll</Data>
    <Data>e4e5532b-3049-11df-b441-005056c00008</Data>
  </EventData>
</Ev

15
Network / IP Camera Compatibility / ACTi Cameras
« on: February 23, 2010, 08:28:26 PM »
Just a quick note it seems the 34xx series dome cameras now support mjpeg streaming via url (finally) as of firmware 3.11.13-AC.  The url to use is "http://xxx.xxx.xxx.xxx/cgi-bin/cmd/system?GET_STREAM".  To get it working you need to do a few things.

1. The device is set to use MJPEG codec
2. B2 Header has been disabled. (Uncheck Enable B2 Header in the Video Setting screen)
3. Audio In must be disabled.

Testing and working with the latest icamsource and an ACTi ACM-3401.  I will test more versions of these cameras as I get my hands on them.

Pages: [1] 2