Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - GillNick

Pages: [1] 2
1
iCam Support / Re: "Cannot Connect To iCam Broker Server" on EDGE or 3G - Fix coming in iCam 1.0.2
« on: July 10, 2009, 05:45:03 AM »


No i did not. Strange . Not easy receiving iCam !   :)
Even e mails. lol


2
iCam Support / Re: "Cannot Connect To iCam Broker Server" on EDGE or 3G - Fix coming in iCam 1.0.2
« on: July 08, 2009, 05:01:31 AM »

I was glad and happy  but I have again : Source Connection Error !!!!!!

Same here in edge as well in Paris in 3G, or even WI-FI point in the town    : One or more of the iCam Broker Server retourned by the Icam Server could not be connected to !!!!!

It begions to be sad and LOL !!!!!!

3
iCam Support / Re: "Cannot Connect To iCam Broker Server" on EDGE or 3G - Fix coming in iCam 1.0.2
« on: July 07, 2009, 06:36:37 AM »
IT WORKS  !!!!!
It was not the question of port in the router. I tested that but could not connect.
I can connect now even in Edge arias.
I just have better upload now !!! The only factor that changed after what I connect easyly every where.

I am happy about that !!!!

4
iCam Support / Re: "Cannot Connect To iCam Broker Server" on EDGE or 3G - Fix coming in iCam 1.0.2
« on: June 23, 2009, 03:57:11 AM »
Thx  Will do my tests   
You ll have my report about ( and event.questions )
waiting for some connections changes
it will take about a week
so till then

5
iCam Support / Re: "Cannot Connect To iCam Broker Server" on EDGE or 3G - Fix coming in iCam 1.0.2
« on: June 22, 2009, 02:34:16 AM »


Jay

just give me the port please.

thx

6
iCam Support / Re: "Cannot Connect To iCam Broker Server" on EDGE or 3G - Fix coming in iCam 1.0.2
« on: June 17, 2009, 09:01:24 AM »
I come back to the idea to open the port in my router. Can you , pls, give me the port which can be used for iCam;
Thx

7
iCam Support / Re: "Cannot Connect To iCam Broker Server" on EDGE or 3G - Fix coming in iCam 1.0.2
« on: June 12, 2009, 01:28:58 PM »
Yes but I can not change the provider for the moment. The moment is long : 1 year ! :)
What could I test more to be sure that they block some of UDP ?

My Internet provider ( it is also sfr ) has nothing to do with my problem ?

Thx

8
iCam Support / Re: "Cannot Connect To iCam Broker Server" on EDGE or 3G - Fix coming in iCam 1.0.2
« on: June 12, 2009, 12:17:18 AM »

I will do it !!!
I also changed  my abonement at SFR
I subscribed a new abonement named  : Forfait Illimythics 3G+ Full Internet
So it starts 21 of this month which means : I ll give you a break till than  :)
thx

9
iCam Support / Re: "Cannot Connect To iCam Broker Server" on EDGE or 3G - Fix coming in iCam 1.0.2
« on: June 11, 2009, 02:08:42 PM »
only on wi fi next to my PC  you might see this connections

10
iCam Support / Re: "Cannot Connect To iCam Broker Server" on EDGE or 3G - Fix coming in iCam 1.0.2
« on: June 11, 2009, 12:56:20 PM »
No, no I could NEVER connect to iCam . NEVER !!!
With two iphones and from several towns . Today I tried to connect from one hot spot, as you asked me to do, on wi fi.
I could not . I had this message :

"Your nework may be preventing from making UDP connections to iSam broker server .
pls contact support .... and so on , and so on "


11
iCam Support / Re: "Cannot Connect To iCam Broker Server" on EDGE or 3G - Fix coming in iCam 1.0.2
« on: June 11, 2009, 06:00:46 AM »

Here is the message I had by hot spot connecting :

Your nework may be preventing from making UDP connections to iSam broker server .



12
iCam Support / Re: "Cannot Connect To iCam Broker Server" on EDGE or 3G - Fix coming in iCam 1.0.2
« on: June 09, 2009, 12:55:52 PM »

I verified on tha card of 3G cuvering for France.
Yes I am in a poour 3G district. I mean my willage.
But I was trying to connect from the areas with the good 3G receiving according to the official Wi-Fi, 3G : Paris and some other towns too.
So I think it "MUST" depend on provider. ( blocking etc )
 You asked me to try to use WI-FI hot spot . I will do it and report here ( not only for me but for the others with similar problems ) .
thx



13
iCam Support / Re: "Cannot Connect To iCam Broker Server" on EDGE or 3G - Fix coming in iCam 1.0.2
« on: June 09, 2009, 12:34:49 AM »
I will try to connect that way ( hotspot, or cyber café ) .
  What we ( 2 iphones ) did till now was to try to connect from our willage, where I know that the 3G is poor, than also wrom an other place, small town next to us, than also in Paris on two diferent locations. We never had one single connection.
Opening one port in my router? Could it help ?
Change the provider ?

14
iCam Support / Re: "Cannot Connect To iCam Broker Server" on EDGE or 3G - Fix coming in iCam 1.0.2
« on: June 08, 2009, 02:29:37 AM »
Yes I am at SFR so as you say they dont block my connection.
No, never an other messege .
When you say it may be due to poor wireless data connection, what connection do you mean ? 
I am "on line" now .
Can you see my place with the login and passworg I gave to you. Mean on 3G.
I dont give up. :)
thx et pls keep on working on my case !
merci

15
iCam Support / Re: "Cannot Connect To iCam Broker Server" on EDGE or 3G - Fix coming in iCam 1.0.2
« on: June 07, 2009, 11:59:42 PM »
done. sent my IP .
thx
waiting

Pages: [1] 2