Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - gpvirzi

Pages: [1]
1
Update:

My issue was solved after Port Forwarding.

Thanks Jay!.


2
Hello,

I have sent an email to the support email about this same problem:
Source Connection Error
One or more of the icamSources returned by the iCam Broker Server could not be connected to.

It happens only on Edge, not on WiFi.
If I press repeatedly the Refresh button on the iCam App I can usually get it to work after a while, but usually not all 3 cams.

I tried launching the Weather or the Stocks app before staring iCam but that does not seem to work.


3
iCam Support / Re: Not able to click the START botton on application.
« on: July 11, 2009, 01:24:44 PM »
I feel a little embarrassed to say it, but I think the problem was that the camera was placed too far from the router...   ;D

Once I got the camera close to the router, I used the last URL you sent me and it was working fine right away.


4
iCam Support / Re: Not able to click the START botton on application.
« on: July 10, 2009, 07:32:17 PM »
Jay,

Thank you for this great costumer Support....  My camera is now working as it should...  The URL you sent was correct!.

Thanks once again.

5
iCam Support / Re: Not able to click the START botton on application.
« on: July 10, 2009, 07:26:05 PM »
Thanks for the reply!.

I used the following URL:

http://192.168.1.106:800/video.cgi?showlength=1

And received this message:

Your Network Camera could not be connected to.
Make sure that the Webcam URL is correct and that your network webcam is not being blocked by any computer or network firewall.


6
iCam Support / Re: Not able to click the START botton on application.
« on: July 10, 2009, 12:55:56 PM »
I was able to connect using JPEG:

http://192.168.1.106:800/IMAGE.jpg

But the images I see on the iCamSource in the computer are very slow, extremely slow...  Is like taking a picture every 4 seconds.

7
iCam Support / Re: Not able to click the START botton on application.
« on: July 10, 2009, 12:49:53 PM »
Thanks for your reply.

My Camera is a D-Link DSC-920.
The port Im using is 8181.

So the URL is like this:
http://192.168.1.106:8181/video/mjpg.cgi

Still no connection:
HTTP/1.0 501 Method Not Implemented




8
iCam Support / Re: Not able to click the START botton on application.
« on: July 10, 2009, 11:01:57 AM »
Ok, sorry about that, apparently I had to press Enter after input of the URL...

But now the problem is:

Your Webcam could not be connected to.  Make sure that the webcam URL is correct.

Can you tell me how to check if Im using the correct URL for the Cam?...  there is a software that came with the camera that says my URL is 192.168.1.106...  So I input in URL: 192.168.1.106/video/mjpg.cgi

Thanks,.

9
iCam Support / Not able to click the START botton on application.
« on: July 10, 2009, 10:31:32 AM »
Hello,
I have succesfully conected 2 web cams using iCam without problems.  Now I want to connect a Wireless D-Link DSC-920 but when I choose the tab for Ethernet/WiFi, the START botton appears not able to be clicked.  If I switch to USB/FIREWIRE tab the START botton appears normal again and I`m able to press it.

Thanks,


Pages: [1]