SKJM Forum

Support => iCam Support => Topic started by: hismaimai8888 on November 14, 2018, 09:51:02 AM

Title: Bandwidth problem
Post by: hismaimai8888 on November 14, 2018, 09:51:02 AM

Hello
When I set on iCamSource preferences 2.8, the bandwidth of my wireless network is: 1.450Mb/s when I stop bandwidth of 9.450 Mb/s.
Can you tell me what to do? Thank you
I have 4 cameras.
Olivier
-----------------------------------------------------------
Công ty rut ham cau quan 12 (https://ruthamcau.suu.vn/rut-ham-cau-quan-12-gia-re.html) giá rẻ dịch vụ rút hầm cầu quận 12 (https://ruthamcau.suu.vn/rut-ham-cau-quan-12-gia-re.html) uy tín

Title: Re: Bandwidth problem
Post by: Stefan on November 19, 2018, 07:03:14 AM

Are your cameras network IP cameras, and not USB webcams? The local network traffic is likely due to your four cameras streaming to the iCamSource running on your computer. If you can reduce the amount of data produced by your cameras, you can then reduce the local bandwidth used. This can be done by either reducing the camera's video size, reducing the frame rate, or both.