SKJM Forum

Support => iCam Pro Support => Topic started by: kenpilotman on March 01, 2015, 09:24:03 AM

Title: can't view from another wifi
Post by: kenpilotman on March 01, 2015, 09:24:03 AM

i checked the auto configure router and get a UPnP may not be enabled. please help.

Title: Re: can't view from another wifi
Post by: SKJM Support on March 04, 2015, 02:44:01 AM

It appears the auto-configuration logic isn’t working for some reason. What is the BrandModel of your router? If your router supports UPNP or NAT-PMP, you may need to enable it in order for the auto-configuration logic to work.

If your router doesn’t support UPnP or NAT-PMP, the only thing left to try is to manually configure your router for port forwarding. There’s more information about using port forwarding with iCamSource here: http://skjm.com/forum/index.php?topic=402.0

If you have any problems with the instructions on that page, please send me the Brand/Model of your router so I can find port forwarding instructions for your particular router.