SKJM Forum

Support => iCam Support => Topic started by: marnoldi on September 26, 2009, 06:49:36 AM

Title: solution to my Icam for iphone viewing
Post by: marnoldi on September 26, 2009, 06:49:36 AM

i finally figure it out why my linksys WRT54GL router would not let me see my camera [ micosoft lifecam VX 6000]
i logged into my router & under security i unchecked:  "Block Anonymous Internet Requests"
also had to remove the Ghost firewall program

now everthging works as it should.
i thought that this may help others with similar problem
 :D

Title: Re: solution to my Icam for iphone viewing
Post by: Stefan on September 27, 2009, 09:41:32 PM

Thanks for the tip! :)

Title: solution to my Icam for iphone viewing
Post by: marnoldi on September 28, 2009, 02:45:09 PM

i also installed the Panasonic BL-C131A ( with the help of lifetime free tech support - really worth it
1(800) 272-7033 and the outstanding help from SKJM in guiding me through the setup.
as an additional guidance to any new users, i'd like to share my setup:
i already have set up the "usb connected  micosoft lifecam VX 6000" and found out that in order for me to have the Wifi Panasonic camera, i would need to double click on the "icamSource" again to open it again as a NEW program, where i would choose "Ethernet / Wi-Fi" tab in iCamSource, then enter that URL
in my case it looks like this: 
http://192.168.1.252:5003/nphMotionJpeg?Resolution=640x480&Quality=Standard
with login & password of that camera
and when i go to the iphone, i now see two screens one from my usb camera & one from my wifi camera
GREAT PROGRAM & Fantastic help
thanks SKJM