SKJM Forum

Support => iCam Support => Topic started by: brucewin on August 31, 2009, 07:51:19 PM

Title: Linksys Wireless-G Internet Home Monitoring Camera
Post by: brucewin on August 31, 2009, 07:51:19 PM

Type of Camera: Linksys Wireless-G Internet Home Monitoring Camera

I have no video source. Camera works fine with the software that came with it on my network and on the internet.

Any help

Thanks

Bruce

Title: Re: Linksys Wireless-G Internet Home Monitoring Camera
Post by: Jay on August 31, 2009, 10:27:49 PM

What is the model of your Linksys camera?  The WVC54GCA and the WVC200 have both been confirmed to work with iCamSource.  The WVC54GC does not work with iCamSource because it doesn't serve up MJPEG or JPEG formatted data.

Title: Re: Linksys Wireless-G Internet Home Monitoring Camera
Post by: brucewin on September 01, 2009, 07:08:05 AM

Got it to work , in the url I just needed the correct port :D

Just bought the motion detection and it works perfectly except I don't get any badges. Yes on the iphone the notifications are all on.

Bruce

Added:
I see that the camera I have has been tested throughly. What router would you recommend mine ocassionally needs rebooted. Also any work around for dynamic IP addresses. When I have to reboot the router (I unplug it then plug it back in) I am assinged another IP address and I have to reinstall my wireless g software then change the url for icamsourse to the new ip address.

Title: Re: Linksys Wireless-G Internet Home Monitoring Camera
Post by: Jay on September 01, 2009, 10:36:18 AM

iCam currently doesn't display badges.  Badges will be added in an upcoming iCam update.

I don't know too much about routers.  I have an Apple Airport Extreme that has worked well for me.  Before that I had a Linksys WRT54G that also worked well.

If you're having a problem with the dynamic IP changing too often on the camera, you can set the Linksys WVC54GCA to use a fixed IP address in the camera settings, under Basic settings.