SKJM Forum

Support => iCam Support => Network / IP Camera Compatibility => Topic started by: kyeck on March 26, 2011, 09:57:57 PM

Title: Support for GeoVision Cameras?
Post by: kyeck on March 26, 2011, 09:57:57 PM

Hello,

I was considering purchasing a GeoVision camera.  I didn't see the brand listed on the support page, but I didn't want to contact support because I haven't purchased the camera yet -- kind of a catch 22.

These are the specific models I was looking at:

1) GV-BL220D -- http://www.geovision.com.tw/english/Prod_GVIPCAMBL220D.asp
2) GV-BL120D -- http://www.geovision.com.tw/english/Prod_GVIPCAMBL120D.asp

Any information would be appreciated.

Thank you,
-Ken

Title: Re: Support for GeoVision Cameras?
Post by: SKJM Support on March 27, 2011, 11:40:27 AM

We haven't tested with that particular camera, but from your links, it looks like it supports MJPEG formatted data, so it should work with iCamSource.

Title: Re: Support for GeoVision Cameras?
Post by: maxbaillargeon on June 02, 2011, 08:30:18 AM

Here's the official answer from Geovison, and btw, it works perfect

Dear Sir,
 
Thank you for your e-mail to GeoVision Support.
 
For your question on IP camera, a command is currently available as shown below.
 
http://220.229.34.200/PictureCatch.cgi?username=admin&password=admin&channel=1
 
IP speed dome and PTZ-010D or any 704*480 supported resolution camera,
due to image sensor's support, the snapshot is taken in 704*240 instead.
 
If the suggested feature does not meet your requirement, then we would suggest
the use of rtsp protocol to acquire the video streaming.

Title: Re: Support for GeoVision Cameras?
Post by: SKJM Support on June 02, 2011, 06:36:55 PM

I'm glad you got it working!

If you have any other issues or questions, please let us know.