SKJM Forum

Support => iCam Support => Network / IP Camera Compatibility => Topic started by: mr ed on March 06, 2011, 07:30:59 PM

Title: Icam on Axis 2400 video server
Post by: mr ed on March 06, 2011, 07:30:59 PM

I have an Axis 2400 Video Server with 4 cameras. When viewing through my web browser, I can see all 4 cameras. When viewing through the ICAM software, it displays only the first camera. Is there a fix for this?

Title: Re: Icam on Axis 2400 video server
Post by: Jay on March 07, 2011, 12:22:32 AM

iCamSource requires an MJPEG URL for each IP camera it displays.  If your video server has a unique URL for each camera, then you would be able to access each one in iCamSource.

From searching around, it looks like Axis video servers (some of them, at least), can use an argument in the URL for the camera, like this : "http://<Camera_Address>/axis-cgi/mjpg/video.cgi?resolution=320x240&camera=1" 

If your video server supports that argument, you should be able to enter different values for the "camera" variable to access different cameras

Title: Re: Icam on Axis 2400 video server
Post by: mr ed on March 08, 2011, 05:12:29 AM

Jay,
That was it. Thanks a million. You guys are awesome. It works perfectly