SKJM Forum
Support => iCam Support => Topic started by: srubino on January 02, 2011, 06:52:08 AM
-
still problem with icamsource on computer
router draytek vigor2700ve
Auto-Config Router on
and error in icamsources appear
error:upnp 0 : NAT-PMP 2,-10,9
IMMAGE ON computer appear but on iphone not work
-
From your router's specification it looks like it supports UPnP, but it might not be enabled: http://www.draytek.co.uk/products/vigor2700.html
Is UPnP enabled in your router? The iCamSource UPnP error message indicates that it may not be.
What error message are you seeing when you are unable to connect: No Sources Found, Broker Connection Error, or Source Connection Error? Are you having problems connecting when your phone is connected via 3G, WiFi, or both?
If you uncheck the Auto-Config Router checkbox, are you able to connect?
-
yes
UPnP enaple
system windows xp
icamsources seems work but not from iphone
error is "no sources found there are currently no running icamsources
errror is
no sources found there are currently no running icamsources assciated with your existing login and password
(login and password is the same on pc and on iphone
:-(
-
version icamsources 2.2.1
version icam on iphone 2.1.1
-
151.76.22.131 my ip adress
-
I was able to find iCam connections from that IP address but none from the iCamSource. Is that the IP address as reported from the computer currently running the iCamSource? When you click the Start button do you see the words "Connecting ..." or "Connected to Server" in the iCamSource Preferences window title bar?
-
see the words "Connecting ..."
-
That means icamsource isn't able to connect with the broker server. In simpler terms, it means icamsource on your computer is not able to send data over the Internet. Most likely you have a firewall that is blocking icamsource or blocking UDP traffic. Worst-case senario, your Internet provider is blocking UPD traffic.
-
Since iCam is able to connect from the same WiFi network it is most likely either firewall or security software running on the computer that is blocking the iCamSource. Do you have any firewall or security software running on your computer? If you temporarily disable it, are you able to connect? (I am assuming that you also unchecked the Auto-Config Router checkbox, correct?)
-
sorry but i stopped all firewal I shoul not have firewall
but it doesn't work still
sure it is a probrem of network becouse I tried on my friend's pc and it work immediatily
:-(
help me
sa
-
ever the same error
"no sources found"
-
stefan
in your problem list i did not find solution may you help me?
thanks
sa
-
Can you e-mail a screenshot of your iCamSource Preferences window to support@skjm.com after you have clicked the Start button? I may see something in your configuration that could be the cause of your issue.
Please reference this forum post in your e-mail.
-
stefan
I sent a file bu email (my email is consulenza_aplibero.it)
have you received
ciao
sa
question
I must have e ip static in the router or Ican use Obtain an IP address automatically ??? now i am in the case of Obtain an IP address automatically , coulbe this the problem????
ciao
sa
-
stefan
newwwws :-)
NOW icam work in wireless
but not in 3G connection still :-[
the error in iphone ICAM is
"source connection error one or more of the icam sources returned bt the icam broker server could not be connected to "
??????
same help ????
bye
sa
-
Do you have auto configuration enabled in icamsource? It sounds like the uPNP isn't working. If it is enabled and it is working properly, I think icamsource will show you a uPNP success message when it starts and successfully configures the router. Your modem doesn't behave as a router, right? In other words, do you only have one router in your network?