Messages

16

iCam Support / Re: IcamSource 2.6

« on: June 29, 2013, 04:44:19 PM »

I'm using 9 IP cameras on a Mac Pro with 8 cores and 11GB of main memory - it never used to take this much... I doubt that is the problem.

17

iCam Support / IcamSource 2.6

« on: June 29, 2013, 04:38:45 AM »

Hi,

Icamsource is constantly using over 50% of my computer's resources - surely this cannot be right? Any thoughts on how to fix this?

18

iCam Support / iCam requires DMZ

« on: June 17, 2012, 05:53:27 AM »

Hi,

Here's a weird one. I can only access all the cameras (in two locations from two icamsources) if I put an iPad in the router's DMZ. Other iPads outside the DMZ (or taking the working iPad outside of the DMZ) cannot access the second more remote site. Anyone got any thoughts on why this could be? Switching the firewall on the router off has no effect.

19

IP Cam Config Support / Re: Scanning existing cameras?

« on: April 12, 2012, 12:40:47 PM »

I'm using a number of Trendnet cameras and the app isn't finding any of them - could it be because I have them on different ports than 80?

20

iCam Support / Re: Keep alive on mac

« on: September 24, 2011, 12:42:27 PM »

Got it thanks. Great support - as always!

21

iCam Support / Re: Keep alive on mac

« on: September 23, 2011, 03:54:43 AM »

Thanks,

Lorena sent it to me before, but I seem to have lost the email. I can only find the PC method in the forum how to do this, not the Mac, so it would be good if you put the method on here for future reference 

22

iCam Support / Keep alive on mac

« on: September 22, 2011, 04:49:53 PM »

Hi,

Can you let me know how I can switch on keepalive on my mac as my external ip address keeps on changing.

23

iCam Support / Dericam M205w

« on: September 15, 2011, 04:43:19 AM »

Hi,

Just a notification - the MJPEG address for this camera is the same as the Foscam cameras.

24

iCam Support / Re: Mac OSX 10.7 "Lion"

« on: August 29, 2011, 04:31:03 PM »

Still not solved, in fact with the latest release of iCamSource, it is crashing more regularly on two different macs. Are there many using Lion who don't have this problem.?

25

iCam Support / Re: Mac OSX 10.7 "Lion"

« on: August 04, 2011, 12:15:40 PM »

Quite a bunch of logs! Sent as requested.

26

iCam Support / Re: Mac OSX 10.7 "Lion"

« on: August 03, 2011, 01:24:42 AM »

I'm having iCamSource crashing regularly - maybe every day at least once, sometimes inelegantly, requiring a reboot before being able to start iCamSource again.

Is there some sort of log I can send which will help diagnose the issue?

What is the the % CPU usage of the iCamSource application?

Also, if you Stop iCamSource and run Photobooth, is it running at a high CPU %?

ICamSource uses About 10% of CPU, stopping that and using photo booth; photo booth uses about 2%.

27

iCam Support / Re: Mac OSX 10.7 "Lion"

« on: August 02, 2011, 07:47:30 AM »

I'm having iCamSource crashing regularly - maybe every day at least once, sometimes inelegantly, requiring a reboot before being able to start iCamSource again.

Is there some sort of log I can send which will help diagnose the issue?

28

iCam Support / Re: image for TV-IP312W

« on: July 25, 2011, 04:08:46 PM »

Hi,

I found that: http://192.168.0.x/cgi/mjpg/mjpg.cgi works with mine - it did take a little time before the picture came up on my mac - so have some patience ( in fact it didn't work with Safari, I had to use Opera). Putting this in the iCamSource preferences with the MJPEG setting worked fine.

29

iCam Support / Re: iPad sees remote iCamSource, but ipad2 doesn't.

« on: July 09, 2011, 12:27:08 PM »

They are using the same username/password and both routers are using the auto configuration. It isn't an issue with that part of the system as the iPad sees almost all the cameras and the iPad2 only sees the local ones.

When in the remote location, the iPad2 sees all cameras.

30

iCam Support / iPad sees remote iCamSource, but ipad2 doesn't.

« on: July 09, 2011, 06:45:39 AM »

Hi,

My iPad can see both my iCamSources (one local, one remote) and picks up 'most' of the Remote cameras - there is about a second delay before 2 or 3 (out of 4) of the camera sources show up.

On my ipad2 (same network etc.) I can't access the remote iCamSource at all! Any ideas?