SKJM Forum

Support => iCam Pro Support => : ProfessorM December 17, 2014, 07:53:29 AM

: Camera "Control" with iCam Pro
: ProfessorM December 17, 2014, 07:53:29 AM

I used to be able to remotely control my FOSCAM cameras with iCam before upgrading to iCam Source Pro.  I note that the extensions that I use to access the cameras in iCam Source was "video.cgi" and that MJPEG was checked.  In iCam Source Pro, in order to "see" the cameras, I apparently have to use an extension of "snapshot.cgi" but the finger swipes to remotely move the cameras no longer work.  Am I doing something wrong?

Thanks!
fjm

: Re: Camera "Control" with iCam Pro
: SKJM Support December 29, 2014, 01:40:35 PM

The MJPEG video.cgi URL should work with the iCamSource Pro if it worked for the iCamSource. Please make sure that the original iCamSource is not running when attempting to connect the iCamSource Pro to the cameras.

: Re: Camera "Control" with iCam Pro
: ProfessorM December 30, 2014, 06:59:55 AM

 :)  Worked Great!  Thanks!

: Re: Camera "Control" with iCam Pro
: SKJM Support December 31, 2014, 11:31:49 AM

I’m glad you got it working!

If you have any other issues or questions, please let us know.