SKJM Forum

Support => iCam Support => : pdomson April 29, 2015, 11:52:37 AM

: replay speed when viewing motion events
: pdomson April 29, 2015, 11:52:37 AM

Is there a way to slow down the replay speed when viewing motion events? thanks in advance.-paul.

: Re: replay speed when viewing motion events
: SKJM Support May 01, 2015, 01:47:05 AM

iCam plays back the Motion Event images as fast as it can from the iCamSource.


To enable a delay in the playback for Mac:

Open an Applications > Utilities window and copy / paste the following and press Enter to save the setting before launching the new iCamSource: defaults write com.skjm.icamsource MotionEventPlaybackMinDelay -int 250

That essentially sets the option to wait 1/4 of a second (or 250 ms) before displaying the next image. This will result in a maximum playback rate of 4 frames per second.

If that is still too fast, you can change the 250 to 500 to make the maximum 2 frames per second, or if 250 is too slow, she can enter 100 to achieve 10 frames per second.


To enable a delay in playback for a Window computer:

Please download and run (double-click) this file: http://skjm.com/icam/MotionEventPlaybackDelay.reg