SKJM Forum

Support => iCam Support => : geraldrappdc January 12, 2011, 11:01:02 AM

: able to see 2 cameras via web..
: geraldrappdc January 12, 2011, 11:01:02 AM

Hi.. I have 2 cameras connected to my mac.. both preview in source application, and I CAN SEE BOTH VIA THE WEB!
MY IPAD AND IPHONE only show one of the cameras...

help? please

: Re: able to see 2 cameras via web..
: Jay January 12, 2011, 06:39:12 PM

When you view the cameras on iCamWeb, is it from the same local network as the computer running iCamSource (or even the same computer)?

When connecting with the iPad/iPhone, are they connected to the same local network, or to a remote network?

: Re: able to see 2 cameras via web..
: geraldrappdc January 12, 2011, 08:21:22 PM

SOMETIMES THE SAME LOCAL NETWORK, BUT TODAY I WAS AT WORK AND WAS ABLE TO ACCESS THE iCAMWeb and saw both cameras.

when using ipad/iphone - I used 3g and still only 1 camera showed up, and tried another wifi network and it also showed only one camera. please advise.



On Jan 12, 2011, at 9:15 PM, Gerald Rappaport wrote:

Once again, I have a TRENDNET camera hard wired and a Firewire isight.
It works 99% of the time via the web, sometimes it shows more then the 2 cams... but I just restart and its ok.
when I'm on the ipad or iphone... 3g or local wifi, I get only 1 camera view.
sometimes when I refresh, it alternates.

THANK YOU FOR THE HELP.

gerald

: Re: able to see 2 cameras via web..
: OUAnthony January 12, 2011, 09:42:16 PM

Have you enabled uPNP in your router and auto configuration in icamsource? Sounds like a port forwarding issue.