SKJM Forum
Support => iCam Support => : ronrrm December 31, 2011, 01:00:47 PM
-
I seem to have some issue running two Easycap usb adapters on a Vista machine. Both adapters show up, but only one will display an image in Icamsource, the other only shows a grey image. Both adapters are producing images, I can swap the video from one to the other and the picture (that shows up) changes to the other cam.
Icamsource knows that there are two different adapters; even though they have the exact same names in the drop-down. If I choose the first one in a two separate camera window, the program says there are duplicates and removes one of them. If I carefully select the first Easycap listed, then add another cam with the second Easycap listed, only the first cam displays an image, the other is grey.
So, is there a trick or something to get the second or any number beyond one EasyCap DC60 adapters to work with Icamsource?
ron
-
Thank you for your post.
Generally we do not recommend adapters but are you able to view both via any other video capture softwares running at the same time?
-
I finally gave up on this...I could see images on both adapters at the same time, but eventually it would BSOD