SKJM Forum

Support => iCam Support => Network / IP Camera Compatibility => : raymate February 03, 2012, 11:25:18 AM

: Can I use iZon camera?
: raymate February 03, 2012, 11:25:18 AM

I have a linksys and was thinking about the iZon Stem camera (as it's small)  can I use this with iCam software?

: Re: Can I use iZon camera?
: SKJM Support February 03, 2012, 11:10:04 PM

Thank you for your post.

According to the iZON specifications (http://steminnovation.com/page/Tech_Specs/49/24/ (http://steminnovation.com/page/Tech_Specs/49/24/)) it does not support MJPEG formatted data and therefore is not compatible with iCam.

: Re: Can I use iZon camera?
: raymate February 04, 2012, 09:26:11 AM

: SKJM Support  February 03, 2012, 11:10:04 PM

Thank you for your post.

According to the iZON specifications (http://steminnovation.com/page/Tech_Specs/49/24/ (http://steminnovation.com/page/Tech_Specs/49/24/)) it does not support MJPEG formatted data and therefore is not compatible with iCam.

Thanks for the reply, pleased I checked I almost got one. Looking at the foscam instead, I like the idea of pan / tilt :)

: Re: Can I use iZon camera?
: SKJM Support February 06, 2012, 11:10:57 AM

In general Foscam's work well.

We also discuss the recommended cameras on our forum at: http://skjm.com/forum/index.php?topic=908.0 (http://skjm.com/forum/index.php?topic=908.0)

Please note that the Airlink cameras advertised as "Windows Only" are Mac compatible and can easily be setup using IP Cam Config instead of the provided Windows install disc.

: Re: Can I use iZon camera?
: raymate February 06, 2012, 11:53:20 AM

: SKJM Support  February 06, 2012, 11:10:57 AM

In general Foscam's work well.

We also discuss the recommended cameras on our forum at: http://skjm.com/forum/index.php?topic=908.0 (http://skjm.com/forum/index.php?topic=908.0)

Please note that the Airlink cameras advertised as "Windows Only" are Mac compatible and can easily be setup using IP Cam Config instead of the provided Windows install disc.

Thanks for the reply, I just ordered a foscam FI8918W  today :)