SKJM Forum

Support => iCam Support => Network / IP Camera Compatibility => Topic started by: annamikk on June 07, 2009, 04:34:50 PM

Title: no Audio on iphone
Post by: annamikk on June 07, 2009, 04:34:50 PM

Just purchased your software.  I have no audio when zooming in, my 3G iphones volume is all the way up, I can hear just a slight hiss coming from it.  On wifi or 3G. I am running Vista with a Logitech 9000 pro with built in mic the picture if there just no audio. :'(

Title: Re: no Audio on iphone
Post by: Jay on June 07, 2009, 11:35:41 PM

What entries show up in the Audio drop down list in iCamSource, and which one are you selecting?  There is usually an audio line-in by default, in addition to the mic from your webcam.  If you select the  line-in when there isn't a mic plugged into the microphone jack on your computer, you'll just hear a hiss.

If you are selecting the correct entry in the Audio drop down list, then the other possibility is that the volume level for the microphone is set too low in Vista's audio settings.