SKJM Forum

Support => iCam Support => Network / IP Camera Compatibility => : ziggych84 June 25, 2012, 05:20:37 AM

: DLINK DCS-932L
: ziggych84 June 25, 2012, 05:20:37 AM

Hey guys,

I apologise in advance if a similar thread has already been started. I just purchased a D-LINK DCS-932L network camera. I run a 13" Macbook. I obtained the camera's IP address and inputted the address into icamsource's URL area on my mac. I have a 2nd camera enabled- my isight camera (built into my macbook). Both show up on my icamsource and work perfectly.

All is well until I installed the iPhone app and tried to view those cameras remotely. My isight camera comes up fine- my D-Link however comes up as a still colour image that does not move.

I mention colour because at the moment the D-LINK camera is set to night mode (black and white) however even the still image appears to be one from my isight camera and not the D-LINK.

Bit lost here...

: Re: DLINK DCS-932L
: SKJM Support June 26, 2012, 11:27:22 PM

Please email screenshots of iCamSource (while it's running) with the iSight selected and with the D-Link selected to support@skjm.com.

Also, please reference this forum post and your user name in your email.