Author Topic: icam source 2.1.1 problem  (Read 9664 times)

sung79hoon

  • Newbie
  • *
  • Posts: 4
    • View Profile
icam source 2.1.1 problem
« on: September 15, 2010, 05:03:49 PM »
Before I updated icam source, everything was fine. After I updated icam source to 2.1.1, whenever I log in, my iphone says 'no source found'! The weirdest part is that if I creates a 2 letters long password, it works!! If I creates a more than 2 letters long password, it doesn't work. 2.1.1 version has a problem with password.

dolled

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: icam source 2.1.1 problem
« Reply #1 on: September 15, 2010, 08:27:50 PM »
I have the exact same problem.


swaghorn

  • Newbie
  • *
  • Posts: 8
    • View Profile
Re: icam source 2.1.1 problem
« Reply #2 on: September 15, 2010, 09:02:34 PM »
Yep...me too. I had a LONG password before, bow l can only have a 6 character password...!
Strange...!

Jay

  • Administrator
  • Hero Member
  • *****
  • Posts: 1096
    • View Profile
Re: icam source 2.1.1 problem
« Reply #3 on: September 15, 2010, 09:06:24 PM »
Are you guys seeing this on Mac or Windows? 

I know sung79hoon is seeing it on Windows, but what about the rest of you?

samuelk

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: icam source 2.1.1 problem
« Reply #4 on: September 15, 2010, 09:27:43 PM »
Have you rebooted your iphone since installing the newer version of icam?

I had problems with icam on my iPad, but after rebooting the iPad, everything worked great.

sung79hoon

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: icam source 2.1.1 problem
« Reply #5 on: September 16, 2010, 02:17:05 AM »
I rebooted my iphone but the problem still remains. It's strange.

GaryW

  • Newbie
  • *
  • Posts: 21
    • View Profile
Re: icam source 2.1.1 problem
« Reply #6 on: September 16, 2010, 05:34:01 AM »
Running fine with iCamSource 2.1.1.

I've found that when I play around with my webcam setup on the Windows PC, I sometimes have to re-enter the password in iCamSource and then in the iPhone/iPad and this does the trick.  This has been the same with previous versions of iCamSource too - not a drama once you know what is going on.

fwpiii

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: icam source 2.1.1 problem
« Reply #7 on: September 16, 2010, 05:50:33 AM »
Once I upgraded the icam source software on my desktop and rebooted I get the No Sources Found - there are currently no running iCamSources associated with your existing login and password. Worked without issue prior to the upgrade. I will try changing the login and password since it seems to have worked for some others, is there thoughts for a fix for this since it seems to be a fairly wide spread concern.
Thanks

dolled

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: icam source 2.1.1 problem
« Reply #8 on: September 16, 2010, 06:00:45 AM »
it's on windows and is when password is longer than 2

dolled

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: icam source 2.1.1 problem
« Reply #9 on: September 16, 2010, 06:28:21 AM »
so....

Any news: We cannot use this with only two letters in the password....

GaryW

  • Newbie
  • *
  • Posts: 21
    • View Profile
Re: icam source 2.1.1 problem
« Reply #10 on: September 16, 2010, 06:42:14 AM »
so....

Any news: We cannot use this with only two letters in the password....

Have you tried entering the password again in iCamSource, then entering it again in iCam?

Works fine for me when I do this - on both the iPhone and iPad

dolled

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: icam source 2.1.1 problem
« Reply #11 on: September 16, 2010, 07:16:27 AM »
Yes, I've done that yesterday. But maybe they have done some changes today?

I'll give it a try...

dolled

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: icam source 2.1.1 problem
« Reply #12 on: September 16, 2010, 07:23:57 AM »
so....

Any news: We cannot use this with only two letters in the password....

Have you tried entering the password again in iCamSource, then entering it again in iCam?

Works fine for me when I do this - on both the iPhone and iPad

Does not work. Tried it on both iPhone&iPad and also restarted iCam on server.

Just comes with: "No Sources Found" "There are currently no running iCamSources associated with your existing login and password"

But if I use a password which is only 2 letters long... It works.

Please fix it ASAP

captual

  • Newbie
  • *
  • Posts: 30
    • View Profile
Re: icam source 2.1.1 problem
« Reply #13 on: September 16, 2010, 07:44:48 AM »
after 2.1 install, I alway get Icamsource has encountered a problem and needs to shut down.. report to Microsoft.
This is happening on three windows XP computers? After deleating program and re install previous version it now Still gives error!

Jay

  • Administrator
  • Hero Member
  • *****
  • Posts: 1096
    • View Profile
Re: icam source 2.1.1 problem
« Reply #14 on: September 16, 2010, 11:32:56 AM »
This new version uses the registry more than the last version, so it's possible that the registry key has somehow gotten into a bad state. 

Please download and run (double-click) this file: http://skjm.com/icam/CleaniCamKey.reg

That will erase the current iCamSource settings in your registry.  You will need to re-enter all of your settings, but hopefully the problem will be resolved if it's due to a problem in the registry.