Messages

1

iCam Support / Re: iCam won't start solved (Yosemite)

« on: October 01, 2014, 01:04:25 AM »

Thank for your help. It was my fault. I forgot that my mac is already with "Yosemite"  featured.
iCam is not yet ready for "Yosemite"

So on my Maverics iCam runs smoothly.

Christian

2

iCam Support / Re: iCam won't start

« on: September 07, 2014, 08:17:52 AM »

Yes I did. I use this app since several years on another mac. After change to another mac I have problems with the latest relaese.
Thanks

3

iCam Support / iCam won't start

« on: September 04, 2014, 12:56:15 PM »

iCam start button not active. Everything configured but the button is grey. What can I do?
Thanks Christian

4

iCam Support / SHow stop the videostream without stop the record feature

« on: July 28, 2011, 08:47:59 AM »

I have three cam´s installed and want solely use the motion and record feature. The cams in icamsource are consuming to much of my small upload bandwith.

Any tips ?
Christian

3 640*480 IP cams
1 build in iSight

5

iCam Support / Re: PNP_AddPortMapping() Error 401 - Invalid ActionNAT-PMP 3,-7,61

« on: July 25, 2011, 07:39:34 AM »

My Router
Fritzbox 7260

6

iCam Support / Re: Motion detection shedule can´t find stop time button

« on: July 05, 2011, 03:28:37 AM »

Ok thanks. I´m so blind.

7

iCam Support / Motion detection shedule can´t find stop time button

« on: July 04, 2011, 06:29:05 AM »

Great app. thanks! But I can not find the stop time button in the schedule of the iCam source. What is wrong?
Second question.

What does the motion button in the iPhone app mean? The button between sensitivity and push notification button. I can not see a working feature behind.

8

Beta Testing / Beta works fine !

« on: July 04, 2011, 06:19:54 AM »

Phantastic !! Thanks!!

9

iCam Support / Re: PNP_AddPortMapping() Error 401 - Invalid ActionNAT-PMP 3,-7,61

« on: July 04, 2011, 05:54:52 AM »

Ok thanks. Solved! My router accepts smaler port diggits only. 12000 was out of the supported range.
Works fine with 3 cams.
Christian

10

iCam Support / Re: What does the broker server?

« on: July 01, 2011, 07:42:02 AM »

Ok thanks, but seems to be very buggy. I tested a lot of ip camera apps and other remote apps with Dyn DNS.
iCam with UPnP is the most struggling setup at all.

11

iCam Support / What does the broker server?

« on: July 01, 2011, 05:26:47 AM »

Please tell me what is the job of the broker server? Does the server manage the traffic of all iCam users?

Christian

12

iCam Support / Re: 4 cameras on icamsource, iphone can only see 3 and other pc can see 2 cameras

« on: July 01, 2011, 05:13:45 AM »

Same issue was here with me. Was a port forwarding problem.
Christian

13

iCam Support / Re: PNP_AddPortMapping() Error 401 - Invalid ActionNAT-PMP 3,-7,61

« on: July 01, 2011, 02:59:49 AM »

It works only in my home network. Seems to be a portforwarding issue.
Christian

14

iCam Support / Re: PNP_AddPortMapping() Error 401 - Invalid ActionNAT-PMP 3,-7,61

« on: June 30, 2011, 10:02:33 AM »

Router and computer restart no effect
Yes UPnP is enabled.

15

iCam Support / PNP_AddPortMapping() Error 401 - Invalid ActionNAT-PMP 3,-7,61

« on: June 30, 2011, 06:36:45 AM »

Since the last update I get these message. I tried manual portforwarding to 12100 without success.
I can see my cameras in the preference pane but not access from web or iPhone app.
I use dydns all other apps like aircam ipcams etc are working. But I would prefer the ipCam App .
Any hints for me?
Thanks Christian