Stefan - Yes, my router is Linksys WAG325N, it run original firmware, it hasn't thirty-part firmware for it, I did it in my router, at first I diable my router firewall and allow anonymous access from Internet, dispear other error info in iCam.
I report some info to support@skjm.com, if you need more info, I will give you.
64 bytes from 98.165.121.51: icmp_seq=0 ttl=51 time=688.507 ms 64 bytes from 98.165.121.51: icmp_seq=1 ttl=51 time=607.971 ms 64 bytes from 98.165.121.51: icmp_seq=2 ttl=51 time=630.375 ms 64 bytes from 98.165.121.51: icmp_seq=4 ttl=51 time=779.210 ms 64 bytes from 98.165.121.51: icmp_seq=5 ttl=51 time=598.414 ms 64 bytes from 98.165.121.51: icmp_seq=6 ttl=51 time=622.922 ms 64 bytes from 98.165.121.51: icmp_seq=7 ttl=51 time=241.726 ms 64 bytes from 98.165.121.51: icmp_seq=8 ttl=51 time=258.511 ms
Stefan - already restart my iCamSource, I can see my cam in iCamSource, I did click start button, the ping result is reachable, also I refresh the iCam in my iPhine, ping is continue in my desktop.
Stefan - well, I am runing iCamSource and it capture a test camera, when I run iCam in my iPhone, it also notify me connect iCam Broker Server error, do I stop ping request?
Stefan - it can ping now, but so funny for this, when I disable firewall in my Linksys router, the ping result is request timeout, enable the firewall it can, very funny. hehe.
Stefan - sorry for my late, because these days I am busy, I have 2 days nope sleep until now, this month my company fire some people, I don't want to be next one, sigh.
my ip is 218.13.73.242 , now. I am runing iCam source for Windows 0.3, it start capture a test camera, my username is netis. you can start analyse my packets.
I need goto my bed for take a rest, I am so tire. if you need make more analyse for my case, do you add my MSN talk about it? my MSN address is hessian@21cn.com, nickname also is "NETiS".
Stefan - I tried via namp connect iCam server, it seem work, but iCam also notify me can't connect iCam Broker Server, I have not any word for this.
Quote
Starting Nmap 4.76 ( http://nmap.org ) at 2008-12-29 11:50 CST Initiating Ping Scan at 11:50 Scanning 98.165.121.51 [2 ports] Completed Ping Scan at 11:50, 0.56s elapsed (1 total hosts) Initiating System DNS resolution of 1 host. at 11:50 Completed System DNS resolution of 1 host. at 11:50, 0.00s elapsed Initiating UDP Scan at 11:50 Scanning 98.165.121.51 [1 port] Completed UDP Scan at 11:50, 5.58s elapsed (1 total ports) Host 98.165.121.51 appears to be up ... good. Interesting ports on 98.165.121.51: PORT STATE SERVICE 12613/udp open|filtered unknown
Read data files from: /usr/share/nmap Nmap done: 1 IP address (1 host up) scanned in 8.92 seconds Raw packets sent: 4 (124B) | Rcvd: 1 (28B)
Stefan - BIG thanks your make firewall allow ping for my test, I test in my iPhone(EDGE mode & wifi) and laptop, both can ping reachable the iCam Broker Server(98.165.121.51), I am very happy for this.
I found in my iPhone, iCam try to connect 2 IP address, both are google, it didn't connect 3rd IP address?
my iPhone in Jailbreak status, and Unlocked.
sorry for my poor english, I think you very hard talk to me.
Stefan - First, thanks for your answer, but I give up, because I can't make sure which has problem in my case, maybe Zero config idea is good , but not for me at lease, I can't access any IP address in my country. sigh....
Show Posts
