SKJM Forum

Support => iCam Support => Topic started by: Stefan on November 05, 2013, 05:50:49 PM

Title: iCamSource 2.7.2 Released
Post by: Stefan on November 05, 2013, 05:50:49 PM
iCamSource 2.7.2 has been released today for both Windows and Mac, and includes general bug fixes as well as support for the new Foscam IP camera firmware issue discussed here: http://skjm.com/forum/index.php?topic=5986.0

The new versions of the iCamSource can be downloaded below or from http://skjm.com/icam/support.php


Windows 8 and later - http://skjm.com/icam/iCamSourceSetup2.7.2.Win8.exe
Windows XP / Vista / 7 - http://skjm.com/icam/iCamSourceSetup2.7.2.7VXP.exe



Mac OS X 10.6 (Snow Leopard) and later - http://skjm.com/icam/iCamSource2.7.2.dmg
Mac OS X 10.4 & 10.5 (Tiger & Leopard) - http://skjm.com/icam/iCamSource_Tiger_Leopard_2.7.2.dmg



As always, if anyone has any questions, issues, or comments about the functionality, please let us know.

Thanks! :)
Title: iCamSource 2.7.2 Released
Post by: 35remington on November 07, 2013, 05:54:38 PM
I stopped using iCam Source for the past 4 months because it was slowing down my while computer (quad core iMac). Does this update address that problem?
Title: Re: iCamSource 2.7.2 Released
Post by: kristinkski on November 14, 2013, 01:21:48 PM
Hi,

I accidentally installed the newest update on my Mac not catching that it wasn't for a computer running Snow Leopard....My computer now won't boot up, it goes to a grey screen with a folder icon and a flashing ?

Can anyone help me with this?

Thanks,

Kristin :-\
Title: Re: iCamSource 2.7.2 Released
Post by: Stefan on November 19, 2013, 04:08:18 PM
Installing the wrong iCamSource version won't cause your computer to stop booting up. It sounds like your computer has other problems, unfortunately: http://support.apple.com/kb/ts1440
Title: iCamSource 2.7.2 Released
Post by: 35remington on November 19, 2013, 04:08:45 PM
What about my question above?
Title: Re: iCamSource 2.7.2 Released
Post by: Stefan on November 19, 2013, 04:10:17 PM
We hadn't heard of any reports of the iCamSource slowing down computers, so we didn't make any changes that would affect that, no.

Is the CPU or memory usage on your Mac high?
Title: iCamSource 2.7.2 Released
Post by: 35remington on November 19, 2013, 04:12:42 PM
You're kidding, right? This has been a problem for ages with your software.

(http://img.tapatalk.com/d/13/11/20/u7umuze7.jpg)
Title: Re: iCamSource 2.7.2 Released
Post by: Stefan on November 19, 2013, 04:16:18 PM
All CPU usage issues that we were made aware of from previous versions have been fixed. Any recent issues with high CPU usage is due to configuration issues attributed to IP cameras with higher-than-recommended frame rates.

If high CPU usage is your issue, how many cameras are you running connected to your iCamSource, and are they IP cameras or USB webcams?
Title: iCamSource 2.7.2 Released
Post by: 35remington on November 19, 2013, 04:19:59 PM
5 cameras total. 4 are Foscam FI8910W, connected wirelessly through Airport Extreme 6th Gen with 65 mb/s Speedtest-verified connection. 1 camera is iSight from the iCamSource host iMac.
Title: Re: iCamSource 2.7.2 Released
Post by: Stefan on November 19, 2013, 04:26:47 PM
Have you adjusted the URLs of all of the Foscam cameras to use a lower (2-5 fps) framrate? - http://skjm.com/forum/index.php?topic=5263.0

If you further reduce the frame rates, does that improve the CPU usage? You can also try reducing the frequency that motion detection is performed for each camera in the iCamSource.
Title: iCamSource 2.7.2 Released
Post by: 35remington on November 19, 2013, 04:29:06 PM
Why would someone buy 15 fps cameras just to dumb them down to 2 fps? Is that what it takes for your software to work correctly?

Yes, I have turned the motion detection frequency down as far as it will go.
Title: Re: iCamSource 2.7.2 Released
Post by: Stefan on November 19, 2013, 04:39:42 PM
The more data you send to the iCamSource by adding additional cameras, the more it will have to process, so the CPU usage will increase. If you reduce the number of cameras or reduce the frame rate, you reduce the amount of data the iCamSource has to receive, and the CPU usage will go down.
Title: iCamSource 2.7.2 Released
Post by: 35remington on November 19, 2013, 04:41:49 PM
I'm running a quad-core iMac here. No scarcity of CPU power. I use Vitamin D to record video from these cameras 24 hours a day, nonstop. Barely makes a blip on the CPU screen. What makes iCam any different?
Title: Re: iCamSource 2.7.2 Released
Post by: Stefan on November 19, 2013, 04:49:28 PM
Not sure ... We'll have to look into Vitamin D and see if we can determine what the difference might be.
Title: Re: iCamSource 2.7.2 Released
Post by: Merlin on November 19, 2013, 11:52:27 PM
I have an older computer that runs nothing but iCamSource and Dropbox.  Five cameras one of which is a USB camera. The frame rate set to 2fps for my IP cameras.  With this setup the CPU runs around the 71% or greater.  If I close dropbox it makes little to no difference.  When I close iCamSource it drops to 0 to 4%.

Hope this information helps,
Merlin
Title: Re: iCamSource 2.7.2 Released
Post by: iktus1818 on January 04, 2014, 04:22:13 PM
Since upgrading to OS 10.9.1 iCamSource 2.7.2 no longer records motion.  The camera works fine.  iCam works well.  I can detect motion and see images on the screen properly.  However even though Record Motion is checked on the Motion Detection tab it no longer records.  The problem is that I cannot say if the issue is directly related to the 10.9.1 upgrade.  All I can say is that I was recording motion fine before this upgrade.  I normally remove the motion events either on the computer or my iPhone.  About a week ago I noticed that when I went to remove the motion events on my iPhone the number was 0.

I am running iCamSource 2.7.2 on a MacBook Air that we purchased in mid-2011.  If the camera was not working or the motion was not being detected I could figure out what to do.  However the only thing not working is the recording of the motion.  My iPhone 4S has the latest version of iOS 7 installed.  I check Library/Preferences and did not see a plist file with skjm in the name.

Any help would be appreciated.